Daewoo Cars & Trucks - Recent Questions, Troubleshooting & Support

Tip

How to Clean a Solenoid Starter in car?


1) Keep the starter on a clean surface.
2) Clean the starter with lubricant cleaner.
3) Remove the motor from starter by removing the bolts holding the starter.
4) Clean the bolts also with the lubricant cleaner.
5)After the bolts are removed the stater will come out.
the inner cylinder connected to the starter will not come out.it will remain in place.
6) Properly clean all the components with lubricant cleaner.
7) Use cleaning brush and rag to clean all the inner components.
8) The starter is cleaned now.
8) Then reassemble all the components back.
This will help.Thanks.


on Aug 31, 2019 | Daewoo Lanos Cars & Trucks


have you got spark at the plugs ? the engine won't run without petrol in the engine. check the air filter isn't blocked .

Daewoo Cars &... | Answered on Aug 24, 2019


It is in the throttle body.

Daewoo Cars &... | Answered on Aug 14, 2019


There is a diagram under the hood.

Daewoo Lanos... | Answered on Jul 15, 2019


could be flat battery
or
faulty solenoid on starter motor
or
Faulty starter motor

Had similar on my car (without an engine redo ) would turn over but not start.
It was car battery . Auto car repair service replaced car battery and no more problem . My car starts and runs without an issue

Daewoo Matiz... | Answered on Jul 13, 2019


Pcv looks like this see pic below
7_11_2019_7_14_24_am.png

Daewoo Cars &... | Answered on Jul 11, 2019


Yes it can be done. I removed the battery and tray and gearbox mount only then was able to wriggle the motor out (after removing sarter,alternator,power steering and air con compressor). Also removing the plastic cover near the front pulley helped. Need small hands! Good luck!

1999 Daewoo... | Answered on Jul 10, 2019


When the clutch was changed, the gear shift linkage would have been disconnected so the transmission could be removed. If it wasn't put back together properly, or had worn parts that weren't noticed at the time, that could be the problem. I once had a Chevrolet Citation (look that up!) with a 4-speed manual transmission, and one day it wouldn't shift into reverse. The linkage was loose, and a fairly easy fix.

Daewoo Cars &... | Answered on Jul 07, 2019


how many times r u gonna ask this,it was already answered and anymore will be deleted
25728313-yol12te0qo4xketzp4vphm1v-4-0.jpg

Daewoo Nubira... | Answered on Jun 26, 2019


You need a scan of the system to determine what is going on, could be as simple as a door ajar sensor.

Daewoo Cars &... | Answered on Jun 16, 2019


  1. The torque settings for the cylinder head bolts on a daewoo ...

    www.answers.com > ... > Categories > Cars & Vehicles > Asian Car i need how much pression (torque) for head daewoo nubira 2001 2.0 ... What is the cylinder head torque specs for a 2001 daewoo nubira 2.0 litre engine and ...

2001 Daewoo... | Answered on May 22, 2019

Not finding what you are looking for?
Daewoo Logo

5,854 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Daewoo Lanos
1999 Daewoo Lanos

550 Questions

2000 Daewoo Lanos
2000 Daewoo Lanos

536 Questions

2000 Daewoo Leganza
2000 Daewoo Leganza

428 Questions

2000 Daewoo Nubira
2000 Daewoo Nubira

417 Questions

2001 Daewoo Lanos
2001 Daewoo Lanos

405 Questions

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

459 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...