Daewoo Cars & Trucks - Page 4 - Recent Questions, Troubleshooting & Support

both the single cam and twin cam engines use the teeth on the crank pulley for crankshaft sensor which is bolted in bracket attached to block near oil pressure switch, hopefully you didnt dent(bent) teeth on crank pulley from dropping it or putting pulley down a bit roughly because they bend really eazy.
also is the crank pulley bolted up in correct position?
is the timming belt tension correct from when you did cam belt?
if tension wrong or timming out by a tooth it will set crank sensor codes, even possibly cam sensor codes and if you get timming out more than 3 teeth either way(advanced or ********) you will bend valves.


2001 Daewoo... | Answered on Feb 04, 2019

Do the basics,check for fuel to the engine,spark at the plugs etc.This should give you direction to the problem.
A shot of gas or starting fluid into the air intake and if it runs on that you do have spark and now can follow a "no fuel" fix.

2005 Daewoo... | Answered on Feb 02, 2019

Need code to work radio. Replaced the battery and it is asking for a code for the radio to work

1999 Daewoo... | Answered on Jan 19, 2019

When you go to parts store to buy the part, they have component location charts that may help you. You know it will be near the camshaft, and often at the front. You might want to just buy a cheap shop manual for full instructions for this and so much more.

Daewoo Matiz... | Answered on Jan 19, 2019

That would require a detailed procedure
so its carried out properly
u can get a manual for help..
I keep getting those for my vehicles too.. I know a lot of websites and which one is best for what type of vehicle. and which websites have customer care service etc

Daewoo Cars &... | Answered on Jan 17, 2019

Could be a coroded rubber seal behind the engine but remember water trickle in there from anywhere

Daewoo Cars &... | Answered on Dec 29, 2018

First remove head and fix the bent valves. I have worked at a Daewoo dealer. People would buy the belt and come right back to get valves and gaskets. Daewoo timing belts must be replaced every 60,000 miles.

1999 Daewoo... | Answered on Dec 08, 2018

by scanning for problem code and repairing problem

Daewoo Cars &... | Answered on Nov 11, 2018

Spark plug leads and distributor cap are damp when dry spray on wd40 on leads and cap and any electrical connections under bonnet

Daewoo Cars &... | Answered on Oct 14, 2018

i suggest if you dont know how you buy a service manual for instruction

Daewoo Cars &... | Answered on Oct 10, 2018

Could you please provide a lot more details so that I can help you with this issue. What exactly is happening, what have you done to try and resolve it and what is happening.

Daewoo Cars &... | Answered on Oct 08, 2018

Not finding what you are looking for?
Daewoo Logo

5,856 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Daewoo Lanos
1999 Daewoo Lanos

550 Questions

2000 Daewoo Lanos
2000 Daewoo Lanos

536 Questions

2000 Daewoo Leganza
2000 Daewoo Leganza

428 Questions

2000 Daewoo Nubira
2000 Daewoo Nubira

417 Questions

2001 Daewoo Lanos
2001 Daewoo Lanos

405 Questions

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers


Level 3 Expert

85206 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

459 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides