20 Most Recent 2009 GMC Envoy - Page 7 Questions & Answers


Torque converter cluts is stuck on. Replace the solenoid.

GMC Envoy Cars &... | Answered on Dec 02, 2014


ONE ON PEDEL ONE ON THROTTLE BODY ON MOTOR

GMC Envoy Cars &... | Answered on Oct 30, 2014


Look for a bound up shift cable.

GMC Envoy Cars &... | Answered on Oct 05, 2014


I did the procedure vehicle still didn't start.I did notice the security light did no blink but stayed solid before it when out.Im lost ..

GMC Envoy Cars &... | Answered on Sep 18, 2014


Silver tube that runs from firewall to compressor some go into radiator area

GMC Envoy Cars &... | Answered on Sep 01, 2014


Yes and no.
It sounds like you have a wiring problem.
The alternator output could be 14 volts and only one or two amps, but that would be enough to kill the warning light. Its more likely the alternator is charging but the current is not reaching the battery.

GMC Envoy Cars &... | Answered on Aug 27, 2014


here is a link with a couple of videos to watch.

https://www.youtube.com/watch?v=gBlBR54itw0

GMC Envoy Cars &... | Answered on Aug 11, 2014


Check the A/C Cluch . This is a common problem on today's Cars .
If that is not it , It is most likely your Idler pulley for the Serpentine Belt , once they get some miles on them or a little dirt they start to be trouble . Hope this helps!!! Grant

GMC Envoy Cars &... | Answered on Aug 11, 2014


EECS.pruge flow.

GMC Envoy Cars &... | Answered on Jul 31, 2014


I would start by replacing the battery in the key fob remote that goes on your keychain. You can take it to most auto part stores and they will test/replace the battery in the device. It's a fairly cheap fix. If the device still isn't working after a new battery, then you will need to replace the fob. Some auto part stores like, AutoZone, will carry some of them but some you need to go to your local GMC dealer.

GMC Envoy Cars &... | Answered on Jul 29, 2014


Cigarette lighter?

GMC Envoy Cars &... | Answered on Jul 23, 2014


The gas pedal could beva drive by wire, meaning there is no physical connection between it and the engine. You did not say the year of your Envoy. If it is there may be a bad accelerator position sensor. If is not drive by wire you may have an issue with your engine. Either way have it checked by a technician that knows you make of vehicle.

GMC Envoy Cars &... | Answered on Jul 19, 2014


bulb in the dash. a very timely repair

GMC Envoy Cars &... | Answered on Jul 18, 2014

Not finding what you are looking for?
2009 GMC Envoy Logo

45 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 GMC Envoy
2004 GMC Envoy

2,174 Questions

2002 GMC Envoy
2002 GMC Envoy

1,364 Questions

2003 GMC Envoy
2003 GMC Envoy

1,327 Questions

2006 GMC Envoy
2006 GMC Envoy

569 Questions

2005 GMC Envoy
2005 GMC Envoy

521 Questions

Top GMC Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Envoy GMC

  • Envoy GMC

Most Popular Question

reset

  • Cars & Trucks
Loading...