20 Most Recent 2004 Mercedes-Benz C200 CDI Questions & Answers


Have a dealer scan the unit for faults.

2004... | Answered on Jul 16, 2016


Turn them off or check your fuses. Perhaps even check your light switch itself.

2004... | Answered on Jun 26, 2015


A computer to set.

2004... | Answered on Nov 20, 2014


readjust the sensor switch for the position of the boot or lock or replace it.

2004... | Answered on May 11, 2014


By hooter I assume you mean the horn? On Mercedes these are controlled by the AAM or all activity module. That's just a computer module that controls the human interactions amongst other things with the car. Airbags, horns, wipers and all sorts of weird stuff is not directly connected to the switches you press. So in your case the problem may be in the wiring or connector but can also be the aam.UnfoUnfortunately you will need to go get it connected to some version of the Mercedes diagnostic software (star system). This will read a code and tell whatever the issue is. It is not the same diagnostic that the normal mechanic can read and usually only found at Mercedes or shops that deal with euro vehicles. This is a pain and will cost but it might be as simple as the code nearing to be cleared. Then the aam will recognise it is connected to two working horns again and allow them to be activated. Before you do that check your wiring and connectors, look for corrosion and or bent broken pins or wires. I would have to look up the fuse or relay for the horn to tell you but those need to be looked at as well. This is the same stuff a mechanics will do but you are cheaper so it's worth doing.

2004... | Answered on Mar 18, 2014


when it shuts off at a half tank are you sure that the fuel tank has a half a tank and the sending unit is bad

2004... | Answered on Oct 15, 2012


Hi Sayid, If you are not using it the container must be leaking. The most common causes are a broken pipe, a defective seal on the washer motor mount or the container is damaged and leaking. Regards John

2004... | Answered on Jun 17, 2012


The first step is to get codes from the computer. When the computer locates a problem it will store a code or codes , letting you know where the problem is and with some testing the problem can be found.
Depending on what the problem is the computer will select limp mode so you are able to get home or to a shop with out causing more damage to other parts of the system.
You will need to go to a shop or a parts store. most auto part stores will scan the computer and give you a print out of the codes.If you get me the codes i will help you in finding the problem.
Good day.

2004... | Answered on Mar 09, 2012

Not finding what you are looking for?
2004 Mercedes-Benz C200 CDI Logo

29 questions posted

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85178 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

C200 Mercedes-Benz

  • C200 Mercedes-Benz

Most Popular Question

lights stay

  • Cars & Trucks
Loading...