20 Most Recent
Questions & Answers
How to fix ac clutch that always engaging
Thats an easy one...
It gets told to engage by a single wire attached to the clutch.
This usually has a bullet type connector close by.
12v = ON
Disconnect it. Solenoid disengages.
(you could put a switch in the line)
This wire is controlled by the AC (control electronics) temperature sensor & the pressure build up in the refrigerant lines.
Eg The unit turns on to cool vehicle but the refrigerant is low or the high pressure line is too high so it shuts off. Then the cycle starts all over again.
You need some Service on your AC system.
on Dec 02, 2015
Mitsubishi lancer 1995
A good starting point to find the problem is to have the vehicle scanned for trouble codes, which will provide info about the problem area of the vehicle. Auto Zone and Advance Auto can do the scan. Once you ahve the codes, you can ook them up on the web for more informaton.
on May 18, 2014
Trouble identifying problem
There are 2 lots of fuse boxes on cars, one in the engine bay and one normally by the drivers door or just under near the drivers knee... This is where the fuse will be and it should be marked as illum. or tail... Let me know how you go.
on Jan 27, 2014
Not finding what you are looking for?