2004 Peugeot 206 - Answered Questions & Fixed issues

Did the belt break Or just due for replacement?

2004 Peugeot 206 | Answered on Nov 02, 2016 | 29 views

you need to read the engine management light when its lit up on dash that will then give you the error code to the problem.

2004 Peugeot 206 | Answered on Oct 31, 2016 | 44 views

Sounds like the unlock button on your key fob is the problem, try your spare key fob, if you don't have a spare fob, it's time to get a new one.

2004 Peugeot 206 | Answered on Dec 06, 2015 | 116 views

try this to reprogram the key to the car,once you change the battery on a car key the go out of sink with the car. this should work


2004 Peugeot 206 | Answered on Nov 29, 2015 | 163 views

Is it petrol or diesel ?? Need more info

2004 Peugeot 206 | Answered on Aug 28, 2014 | 108 views

double posted back up one please and read.

2004 Peugeot 206 | Answered on Jun 30, 2014 | 17 views

which engine gas , diesel, and SIZE.

2004 Peugeot 206 | Answered on Jun 30, 2014 | 20 views

Is it a petrol or a diesel?

2004 Peugeot 206 | Answered on Jun 02, 2014 | 252 views

The problem could be any number of issues with the vehicle pertaining to ignition, fuel delivery, sensors, etc. If you are a home mechanic, take the vehicle to Advance Auto or Auto Zone and ask them to scan the vehicle for trouble codes. Once you have the codes, it will tell you where the problem is. You can look up the codes on the web for more detailed info. If you don't do your own work, take the vehicle to a repair shop for a diagnostic run and repair.

2004 Peugeot 206 | Answered on May 20, 2014 | 94 views

it must have got pushed to far open will have to give it a good shove to get it back , but be aware that there may be some damage to the hinges ,check strap etc

2004 Peugeot 206 | Answered on May 15, 2014 | 60 views

heya u should just need to change the abs pump.....u might not even need to change it as these faults just happen for no reason other than a dirty sensor..... ur ecu ye you dnt need to change try ur brake pads first start wit the cheapest and work ur way through the brakeing system b4 buying any parts hope it helps

2004 Peugeot 206 | Answered on May 07, 2014 | 4,223 views

try disconnecting the battery for a hour and reconnect it this will resest ur ecu unit and 9 times out of 10 fixes it hope it helps

2004 Peugeot 206 | Answered on Apr 05, 2014 | 59 views

sounds like wheel bearing, jack wheel up, an see if there is any free play, by trying to move wheel side to side

2004 Peugeot 206 | Answered on Sep 29, 2018 | 1,689 views

Hola buenas a todo aquel que ve este problema que tengo ( tengo un problema con una hyundai Tucson modelo: 2009 cilindraje : 1.991 ) : me presenta tres c?digos de falla los cuales son ( p1327 - rel? de incandescencia abierto ) ( p0405)( p0562)(p1190) esos son los c?digos en los que eh estado trabajando * pero a?n no doy con el da?o del veh?culo , si me pueden ayudar se lo agradezco ? Ya que eh probado otra pcm revisado todo el ramal del motor asta los soquer de la pcm cambiado todo los censores. Y actuadores de precion de combustible. Y nada

Peugeot 206 Cars... | Answered on Aug 17, 2019 | 1,150 views

inside power distribution box under the hood!

Peugeot 206 Cars... | Answered on Mar 18, 2019 | 42 views

You can try out some guide from here reliable-store
they also provide live chat feature for instant help and it's very useful

Peugeot 206 Cars... | Answered on Mar 12, 2019 | 30 views

There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few reliable-store .. let me know if u need help

Peugeot 206 Cars... | Answered on Feb 27, 2019 | 33 views

If you are positive that the bulb and connector are OK...then there could be several root causes:
Bad wiring:
There could be a short somewhere between the connector and fuse/relay or ground.
But you need to figure out first ... is it BOTH the high and low beams that are out on that side of the car?
I think your bulb has 3 spades for a combination high/low beam bulb. Knowing which line is dead helps on figuring out which wire(s) is the issue. If both high and low do not work ... then it is the ground wire.
If you have a voltmeter you can test out the wiring.
Bad Light Control Module (if your car has this; I could not confirm)
I am not sure if the Peugeot has a light control module but on some Saabs there is one and it caused your same symptom. Read link to learn more

Peugeot 206 Cars... | Answered on Jan 23, 2019 | 51 views

Not finding what you are looking for?
2004 Peugeot 206 Logo

57 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers


Level 3 Expert

85161 Answers


Level 2 Expert

89 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides