20 Most Recent 2005 Peugeot 206 1.6 Questions & Answers


Try a new motor ,these are notorious for packing up if you put blue liquid in it makes everything swell up and jam solid

2005 Peugeot 206... | Answered on May 02, 2013


Hola buenas a todo aquel que ve este problema que tengo ( tengo un problema con una hyundai Tucson modelo: 2009 cilindraje : 1.991 ) : me presenta tres c?digos de falla los cuales son ( p1327 - rel? de incandescencia abierto ) ( p0405)( p0562)(p1190) esos son los c?digos en los que eh estado trabajando * pero a?n no doy con el da?o del veh?culo , si me pueden ayudar se lo agradezco ? Ya que eh probado otra pcm revisado todo el ramal del motor asta los soquer de la pcm cambiado todo los censores. Y actuadores de precion de combustible. Y nada

Peugeot 206 Cars... | Answered on Aug 17, 2019


Check the website below:

Peugeot 206 Fuses.

Peugeot 206 Cars... | Answered on Jul 02, 2019


inside power distribution box under the hood!

Peugeot 206 Cars... | Answered on Mar 18, 2019


You can try out some guide from here reliable-store
they also provide live chat feature for instant help and it's very useful

Peugeot 206 Cars... | Answered on Mar 12, 2019


There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few reliable-store .. let me know if u need help
thanks

Peugeot 206 Cars... | Answered on Feb 27, 2019


If you are positive that the bulb and connector are OK...then there could be several root causes:
Bad wiring:
There could be a short somewhere between the connector and fuse/relay or ground.
But you need to figure out first ... is it BOTH the high and low beams that are out on that side of the car?
I think your bulb has 3 spades for a combination high/low beam bulb. Knowing which line is dead helps on figuring out which wire(s) is the issue. If both high and low do not work ... then it is the ground wire.
If you have a voltmeter you can test out the wiring.
Bad Light Control Module (if your car has this; I could not confirm)
I am not sure if the Peugeot has a light control module but on some Saabs there is one and it caused your same symptom. Read link to learn more
http://saabworld.net/showthread.php?t=29583

Peugeot 206 Cars... | Answered on Jan 23, 2019


Not familiar with that particular model, but on most you must first remove the seat back and seat cover to access the airbag.

Peugeot 206 Cars... | Answered on Jun 07, 2018


Did you get the car plugged into a diagnostic reader after the battery change?
Some newer car ECU's need to be reset to 'new battery' settings. Over time the system alters the battery charge rate as the battery gets older and weaker so a new battery will overcharge if not reset..
The error code, (P0563), reads as "system voltage high".
Get the car plugged into a good diagnostic system and that will allow you to correct the error code and battery settings.
The other symptoms may settle down once the error code is sorted out.

Peugeot 206 Cars... | Answered on Apr 14, 2018


get the service and repair manual it will help you to solve your problem with diagram and even you can fix it yourself http://toolsnyou.com/

Peugeot 206 Cars... | Answered on Apr 14, 2018

Not finding what you are looking for?
2005 Peugeot 206 1.6 Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

scj103

Level 2 Expert

89 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

206 Peugeot

  • 206 Peugeot

Most Popular Question

manuel peugeot 206 converilble

  • Cars & Trucks
Loading...