20 Most Recent 2003 Peugeot 206 Questions & Answers


Type question into Google and click images
Have you tried checking micro switches

2003 Peugeot 206 | Answered on Apr 19, 2018


The very first thing you need to do here is have the engine control module scanned for fault codes with an OBD2 fault code reader or scan tool. Once you have the fault codes then you can diagnose the cause by the fault code or codes received.

2003 Peugeot 206 | Answered on Mar 30, 2017


You need to inspect the undercarriage but it is my guess you jammed the fuel tank into the electric fuel pump screen.

2003 Peugeot 206 | Answered on May 13, 2016


Economy mode means you should charge your battery firs as it might be almost flat.

2003 Peugeot 206 | Answered on Sep 07, 2015


Your going to have to check the fuel sending unit in the tank. The hose between the pump and top of the unit could be cracked and pulling air on the slop or up hill.

2003 Peugeot 206 | Answered on Aug 06, 2015

Tip

Air conditioning


When an vehicle's air conditioning system has not been used for several months, the seals within the system start getting dry. I've never worked on a Peugeot 206 or any other peugeot before, that's why I had no idea where the low pressure ac port was. The high pressure ac port is the easiest to locate, because it is in the engine compartment, facing the car from the front, on left side of the radiator. The low pressure ac port is in the engine compartment, facing the car from the front, to the back in the center, under the windshield. The low pressure ac port and the high pressure ac port both have black dust caps. The low pressure ac port is the smaller of the two.

on Jun 14, 2015 | 2003 Peugeot 206


the fittings sizes were deliberately changed during manufacturer to stop the deliberate use of the wrong refrigerant in the system
ac systems do not need recharging unless there is a leak and that means that the leak has to be fixed first other wise the recharge is a waste of money
get an accredited ac specialist shop to do the job and save money.

2003 Peugeot 206 | Answered on Jun 13, 2015


Sometimes they just clog up. Take a small sewing needle and poke through where they squirt. This should solve your problem. Please let me know how you make out. GOOD LUCK FRIEND.

2003 Peugeot 206 | Answered on Jan 17, 2015


It could be a loose/failed engine or transmission mount. Look at the tranny rear mount and check the bolts and condition. Also check the bell housing bolts AND the bolts connecting the engine flywheel to the clutch pressure plate.

2003 Peugeot 206 | Answered on Jul 24, 2014


remove two screws from armrest (usually covered by small plastic insert) prise out trim from door handle, gently ease panel out from bottom and slip upwards to release from window, once loose if car has electric windows disconnect wires.

2003 Peugeot 206 | Answered on Jul 19, 2014


operators guide, lost. need help finding that,
did you ask the dealer for that?

2003 Peugeot 206 | Answered on Jun 22, 2014

Not finding what you are looking for?
2003 Peugeot 206 Logo

115 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85178 Answers

scj103

Level 2 Expert

89 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

206 Peugeot

  • 206 Peugeot

Most Popular Question

non abs disc brake back axle converted

  • Cars & Trucks
Loading...