20 Most Recent 2006 Peugeot 206 1.4 Questions & Answers


There are a number of possibilities:
1. Not enough anti-freeze in the cooling system. Anti-freeze not only protects against freezing, but also boil-over.
2. Defective thermostat. If it is stuck closed or partially so, it can cause overheating.
3. Clogged radiator.
4. Defective water pump.
5. Blown head gasket.

2006 Peugeot 206... | Answered 2 days ago


Depends on engine kfx engine 8v single cam pulley. The cam pulley has a hole which lines up with a hole on the head and the crank has a hole behind the starter motor wich lines up with a oblong cut out on the flywheel not round holes they are balance holes, you can use a snake cam to look through hole to find that. Kfu engine 16v 2 cam pulleys , again the cam pulleys have holes to pin to the head and the crank has a line cut out that lines up with a marker below the pulley . Hope this helps

2006 Peugeot 206... | Answered on Feb 24, 2019


does it turn over??

2006 Peugeot 206... | Answered on Aug 01, 2018


Get the correct wattage globe. I am suspecting that the resistance of the globe you used as a replacement is lower than the original globe that was in the left bulb position.
Had this problem with a car myself.
The lower resistance changes the timing of the flash .
Maybe get a replacement globe from a Peugeot Dealer if you can't find the correct wattage globe any where else ..

2006 Peugeot 206... | Answered on Feb 10, 2018


If the fault code doesn't reset the problem is not fixed. PERIOD.

2006 Peugeot 206... | Answered on Oct 25, 2017


is it an automatic ? then the revs are limited when idling

2006 Peugeot 206... | Answered on Jul 27, 2016


Change the thermostat, check for leaks, check if your fan turns on and change the fluid while your at it

2006 Peugeot 206... | Answered on May 07, 2016


Try this: Disconnect the battery terminals. Wait 20 minutes and then connect again.

2006 Peugeot 206... | Answered on Mar 11, 2015


Should be a 5 minute task at your nearest dealer. The clips will be genuine part only. Take your VIN number in with you.

2006 Peugeot 206... | Answered on Feb 23, 2015


run the fault codes as it could be a tank venting problem ( canister purge valve ) or blocked cat converter

2006 Peugeot 206... | Answered on Jan 08, 2015


never knew there was fuses for that,usualy that is done manualy

2006 Peugeot 206... | Answered on Dec 12, 2014

Not finding what you are looking for?
2006 Peugeot 206 1.4 Logo

68 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

scj103

Level 2 Expert

89 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

206 Peugeot

  • 206 Peugeot

Most Popular Question

peugeot 206 wont start

  • Cars & Trucks
Loading...