20 Most Recent 2001 Peugeot 206 Questions & Answers


Check car relay and check car problem with obd2 diagnostic tool, it is quickly and easy at OBD Tools 365 Days Shop
Find the particular relay you want to test. Depending on the circuit it controls, the relay may be located under the dashboard or inside the engine compartment in a junction block.
Turn the ignition switch to on to energize the particular circuit you are testing, if necessary.
Connect the alligator clip from a test light to any good ground on your vehicle. Probe the wire coming out of the relay and going to the component with the tip of the test light. If the bulb in the test light glows, there is voltage, and your relay is working properly.
Probe the wire or wires feeding voltage to the relay with the test light following the same procedure used on the previous step. If the light glows, there is incoming voltage. Otherwise, the relay is not receiving voltage. Check the voltage source.
Switch the ignition key off. Unplug the relay from its electrical connector, making sure not to break the locking tabs on the relay.
Identify the relay's power and control terminals. Some relays show a circuit diagram on top of the case to identify these terminals.
Check for continuity between the two power terminals using an ohmmeter. There should be no continuity. If there is continuity, replace the relay.
Connect a jumper wire between the battery positive terminal and one of the control circuit terminals on the relay. Connect the other control terminal to ground with another jumper wire. If you do not hear a click as you make the second connection, reverse the connections. If you still do not hear a click, replace the relay.
Connect the jumper wires as you did on the previous step. Using an ohmmeter, check for continuity between the two power terminals. If there is continuity, the relay is working properly. Otherwise, replace the relay.

2001 Peugeot 206 | Answered on Jan 13, 2014


When you "floor the gas pedal" the computor goes into a bypass mode (emergency mode). This honestly sounds a lot like a problem I ran into a while back on a Dodge truck. Problem was a cracked intake manifold (plastic). Short version: vacuum leak.

2001 Peugeot 206 | Answered on Dec 11, 2013


hi hun x firstly if you look on the passenger side just under your glove box to the right theres a blake lever... pull it and its open xx

2001 Peugeot 206 | Answered on Mar 14, 2013


bad plug/coil

2001 Peugeot 206 | Answered on Feb 02, 2013


how short are they check using your old mirror all you may need to do is get longer screws

2001 Peugeot 206 | Answered on Jul 30, 2012


Hola buenas a todo aquel que ve este problema que tengo ( tengo un problema con una hyundai Tucson modelo: 2009 cilindraje : 1.991 ) : me presenta tres c?digos de falla los cuales son ( p1327 - rel? de incandescencia abierto ) ( p0405)( p0562)(p1190) esos son los c?digos en los que eh estado trabajando * pero a?n no doy con el da?o del veh?culo , si me pueden ayudar se lo agradezco ? Ya que eh probado otra pcm revisado todo el ramal del motor asta los soquer de la pcm cambiado todo los censores. Y actuadores de precion de combustible. Y nada

Peugeot 206 Cars... | Answered on Aug 17, 2019


Check the website below:

Peugeot 206 Fuses.

Peugeot 206 Cars... | Answered on Jul 02, 2019

Not finding what you are looking for?
2001 Peugeot 206 Logo

25 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

scj103

Level 2 Expert

89 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

206 Peugeot

  • 206 Peugeot

Most Popular Question

double relay

  • Cars & Trucks
Loading...