20 Most Recent 2003 Volkswagen Passat Questions & Answers


Those are known to stretch the timing chains once they get up in miles to the point where the engine goes out of mechanical crankshaft to camshaft timing enough not start. In order to confirm this is the issue a person would have to turn the crankshaft to cyl. 1 top dead center and see if the camshaft timing marks line up where they should. I can elaborate if this is something you'd like to do yourself.

2003 Volkswagen... | Answered 47 minutes ago


i don't know. please check the connecting wire harness and connector. it is possible there may be a poor connection due to corrosion , oil grease or dirt. perhaps previous sensor was OK. also, you may be able to test the connecting wire with a jumper wire.

2003 Volkswagen... | Answered on Aug 26, 2019


All those codes mean a specific cylinder missfire. Start with tune up. Plugs, wires & air & fuel filters.

2003 Volkswagen... | Answered on May 31, 2019


Either you installed the wrong temperature sensor or the new one is bad or bad wiring.

2003 Volkswagen... | Answered on May 17, 2019


if leaking it will make noise when you loose enough fluid, best to get it checked now

2003 Volkswagen... | Answered on Feb 05, 2019


I suggest you try one of those instant download manuals. My brother ( a mechanic) buys it when he can't fix some technical
issue He buys from www.reliable-store.com . A lot of mechanics actually do this. Website is very good for this. Must try it !!

2003 Volkswagen... | Answered on Mar 11, 2018


Other than the stop engine now, is it running ok??

2003 Volkswagen... | Answered on Mar 06, 2018


Your immobilization unit don't see the key. In the old key fob contains a chip that was set at a frequency that's compatible with the unit hidden in the vehicle telling it you r the owner and allow you to keep it running.

2003 Volkswagen... | Answered on Jan 15, 2018


check that the vacuum line is feeding the servo any leaks in the vacuum line will stop the brakes from working abs relays on the pedal pressure to activate abs, if you can hear a hissing sound from the servo then the servo is leaking inside this is if the vacuum line is not damaged, use a pipe or screwdriver on the case and put to your ear and you should hear if its hissing or not.

2003 Volkswagen... | Answered on Dec 14, 2017


These are known for their transmission problems. But if the check engine light is on, there's a code stored in the computer. Getting that code is ALWAYS the first step.

2003 Volkswagen... | Answered on Dec 05, 2017


Hi.radio is on its way out best to send it in for repairs or renew

2003 Volkswagen... | Answered on Nov 19, 2017


Your dealer can look it up for you. Should be a free service if they are nice.

2003 Volkswagen... | Answered on Nov 14, 2017


The code needs to be read first.Sounds like the steering angle sensor needs to be reprogrammed with requires high end scan tool. Sometimes driving the car helps the ecu to relearn steering angle sensor.

2003 Volkswagen... | Answered on Nov 12, 2017


Contact Skoda with such a problem.

2003 Volkswagen... | Answered on Nov 02, 2017

Not finding what you are looking for?

1,643 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Passat Volkswagen

  • Passat Volkswagen

Most Popular Question

installed thermostat 2 sensors in 2003

  • Cars & Trucks
Loading...