20 Most Recent 2003 GMC Safari Questions & Answers


When googling... don't be so specific.
Just try something like this...

gmc/ Chevy wiring 2003. Most sites will have breakdowns...ie.. lights...stereos.. speakers..etc. most years are close or compatible as well. Like 2000- 2005 will be almost identical.

2003 GMC Safari | Answered on Apr 04, 2019


Battery cables can corrode under the insulation. When the corrosion gets bad enough the engine wont start. You said that there was smoke. What was it coming from? Many of the jumper cables you can buy now are not big enough to support the amperage that a motor needs to start.

2003 GMC Safari | Answered on Nov 20, 2017


The replacement camshaft position sensor could be defective.

2003 GMC Safari | Answered on Aug 16, 2015


You must have v-6 or v-8 engine , bank determents the side of the engine and on yours bank 2 is the passenger side, an sensor 1 denotes before the catalytic converter .You vehicle has three o2 sensors ,two before the cat an one after .Up stream means before catalytic converter. / downstream after the catalytic converter .

2003 GMC Safari | Answered on Jan 22, 2015


Hello and Welcome to FixYa.com





Are both heater hoses hot i need to know this to go on??





Thank you for using FixYa.com

Regards, Lee Davidian

Your FixYa Expert

2003 GMC Safari | Answered on Nov 21, 2014


Under the hood passenger side. You will have to cut into the panel to remove to blower and then silicone it after replacement

2003 GMC Safari | Answered on Nov 01, 2014


using a test light check the fuses with the key on as some fuses are only powered when the key is on. check both sides of the fuse.

2003 GMC Safari | Answered on Aug 11, 2014


It sounds like a wheel balance problem. Normally wheel balance produces speed specific vibration in the front wheels and steering. To me this sounds similar, caused by one or both rear wheels being seriously out of balance. Get them balanced and ensure that they are both at the SAME pressure.

2003 GMC Safari | Answered on Jun 29, 2014


Is the engine warning light on in the dash? Need to check the codes. There is a way to do it without an analyser using the ignition switch. Varies from car to car so ask a technician.

2003 GMC Safari | Answered on May 29, 2014


If you don't know something or work on
your own vehicles, then you need a repair shop

2003 GMC Safari | Answered on Mar 21, 2013


Click here to see.

2003 GMC Safari | Answered on Feb 06, 2013

Not finding what you are looking for?
2003 GMC Safari Logo

123 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 GMC Safari
2000 GMC Safari

309 Questions

1998 GMC Safari
1998 GMC Safari

247 Questions

1995 GMC Safari
1995 GMC Safari

263 Questions

1997 GMC Safari
1997 GMC Safari

203 Questions

1999 GMC Safari
1999 GMC Safari

191 Questions

Top GMC Experts

Marvin
Marvin

Level 3 Expert

85108 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Safari GMC

  • Safari GMC

Most Popular Question

bank 2 sensor 1

  • Cars & Trucks
Loading...