Question about 1989 Cadillac Eldorado

1 Answer

Need a diagram to put together a 1989 caddilac eldorado power steering,tilt and telescope steering wheel and column.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 95 Answers

Excellent tutorial here that helped me when I had a loose steering wheel on my 1988 Deville.

This one is not from an 89 Eldorado, but all GM Tilt/telescoping steering columns from that time are virtually identical:

http://www.diyfiero.com/dropspot/Jazzman_Steering_Rack_Rebuild.pdf

Posted on Oct 11, 2011

  • lyev Oct 11, 2011

    Actually, that wasnt the telescoping version. I will scan the page from my 88 Deville factory service manual and post the image tomorrow. Its the same column. Will do it tomorrow sometime.

  • lyev Oct 11, 2011

    Sorry, i cant make my scanned image small enough to post the image on this site.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Telescopic steering wheel wont tilt


Telescopic steering wheel stopped moving - MBWorld.org Forums

mbworld.org/.../225749-telescopic-steering-wheel-stopped-moving.html
Jan 9, 2008 - Telescopic steering wheel stopped moving ... If it won't move at all, and you don't even hear a motor, it could be a fuse; check your fuse diagram ... Steering wheel adjustment motor gone bad?
Jan 28, 2008
HOW TO: Fix power steering column that will not move up and ...
Jul 12, 2007
More results from mbworld.org

Fixing the Power Steering Wheel of a Lexus LS400 - YouTube

? 2:15
https://www.youtube.com/watch?v=NP8YmnGRXWU
Jan 4, 2012 - Uploaded by AutoTech USA
If your power steering wheel is no longer working; moving up and down, back and forth, and when you attempt ...

telescopic and tilt steering not working - Cadillac Forums



Dec 01, 2015 | Cars & Trucks

1 Answer

What do I look for to fix the Power seats and power tilt steering has no power


A control module ! Electronics The steering column has a tilt/telescoping control system that consists of an electronic control module capable of class 2 serial data communication, a steering column power assembly with positioning motor and sensor, and a steering column control switch. The multi-function lever provides for the control of the headlamp high beams, and the windshield washer and wiper.
The tilt/telescoping steering column in/out/up/down switch is an input to the driver position module (DPM). The tilt/telescoping drive motor is an output function of the DPM.
Steering column memory settings are stored in the DPM. The steering column position sensor is an internal part of the tilt/telescoping motor assemblies, and is an input to the DPM. The DPM uses the position sensor input when storing and recalling memory settings.
Same thing with the seats , electronic control module .
Battery positive voltage is supplied at all times to the memory seat module (MSM) through the battery positive voltage circuit from the POWER SEATS circuit breaker located instrument panel (I/P) fuse block. This voltage is used to power up MSM and also to apply power to the seat motors when commanded. Battery positive voltage from the TILT/TELE SW/MEM SEAT MOD fuse located in the body control module (BCM) fuse block that supplies voltage to the seat adjuster switch and the memory function switch, also supplies voltage to the MSM. The MSM monitors this voltage circuit in order to determine if battery voltage is supplied to the seat adjuster switch. The MSM is grounded through the module ground circuit and G301.
Body Control Module (BCM)
RH footwell, mounted to the toe board, behind the carpet

Nov 05, 2015 | 2006 Cadillac XLR

1 Answer

Ignition key assembly is locked up. bought a new one but have never changed one. got any instructions and/or diagrams to help me? It's a 1989 Plymouth Voyager 3.0 motor Tilt steering column with shifter on...


Take out the screws holding the upper and lower plastic column covers together. Pull the lower cover off. Now look at the ignition switch mounting bolts, they are anti theft. If you go to "Tools n More" or "Harbor Freight Tools" you should be able to purchase the special anti-theft tip you need in a set to take the screws out. Once you have unbolted the switch putting in the new one is easy.

May 05, 2011 | 1989 Plymouth Voyager

1 Answer

How to tighten 1989 steering column?


There is a u-joint inside the steering column if you have tilt wheel. Which I don't think that I have ever seen a steering column get loose if there is not tilt wheel. If there is not tilt wheel then there are two bolts that hold the steering column up against the bottom side of the dash. You will just need to tighten these two bolts. If you do have tilt wheel, then it is going to require taking the steering column out and replacing the u-joint in the steering column.

Dec 16, 2010 | 1989 Buick LeSabre

1 Answer

Is there a 1981 Grand Prix steering wheel column diagram


Let me know if this is helpful:

Exploded view of a tilt and telescoping steering wheel assembly



c17hydro_10.gif

Nov 12, 2010 | Pontiac Grand Prix Cars & Trucks

3 Answers

How to tighten the steering column in my 1989 Buick Century Custom


need to know which motor you have, if your talking about the colunm itself or the steering wheel (if you grab the wheel at it moves all over) can send diagram showing images and directions how to do column. need email address to send file to.

Feb 09, 2010 | 1989 Buick Century

3 Answers

1989 GMC Sierra 3500 loose tilt steering column


Watch videos on youtube ( repairing loose tilt wheel)

Jul 19, 2009 | GMC Sierra 1500 Cars & Trucks

1 Answer

Steering problem


What i can recall the only removable electronics is the complete turn signal assembly or the other would be the electronic piece that is actually the key reminder buzzer that reminds when key is left in ignition while engine is off...This looks like two flat copper match sticks attatched to a 1 inch piece of plastic... Well enough of my guesing.. if you were to go to an auto parts store and look at a motors repair manual for a chevy steering column little if anything has actually changed in the design with the tilt steering column which is probably why you originally took it apart because of the tilt torx bolts coming loose... I hope you used locktite when you reassembled to makesure it doesnt happen again....Good Luck



Dec 31, 2008 | 1989 Cadillac Sedan DeVille

Not finding what you are looking for?
Cars & Trucks Logo

912 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

Marvin
Marvin

Level 3 Expert

85161 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...