Question about 2003 Mitsubishi Lancer
You will need to remove the center console to access the bulb that is burned out. you can follow this link and it kinda tells you how to take it out. the instructions are for a 2003 but there are no differences Removing Center Console evolutionm net
Posted on Feb 18, 2016
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
You shifter indicator bulb (194 bulb number) has burned out. Pretty easy and cheap fix. The top of the indicator has to be removed/lifted up and teh bulb needs to be replaced.
Posted on Oct 27, 2008
I've done this many times. First grab the shifter and pull up with everything you have. It will come off if you pull hard enough. You may have to use 2 hands and a couple of legs to get it off the first time. After is is off, simply use a screw driver and pry out the trim piece with the letters on it, you know the D,R,N, 1, 2.... The light is under it, so simply untwist the bulb holder to undo it. Ensure you align the notch for the correct gear. You'll be able to tell if you are in Park and your gear selector says Neutral. After you put the trim on, just put the selector knob back on with a sharp blow with your fist.
Posted on Oct 27, 2008
hi.t thing to do firstly is check your fuses under bonnet and then check the fuses inside the car which are mostly under the dashboard and are easy to get to.
It could be that one of your other fuses has blown and caused this to short circuit.
Check all the fuses throughout and if they are all ok except the one that lights up the gears your in,then change that one.
It might not be that the bulb has blown at all.
If this all fails,then you will have to go through the process of taking out the centre concule which is or should only be clipped into place by self tapping screws which should just pop out with a flat ended screw driver and are easy to push back into place with your thumb.
Hope this has helped.
Posted on Dec 03, 2008
try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you
Posted on Mar 21, 2009
Tips for a great answer:
Jul 09, 2015 | 2006 Ford Explorer
Oct 06, 2012 | 2001 Toyota Echo
Sep 21, 2012 | 2002 Toyota Camry
Jul 27, 2011 | 2004 Nissan Sentra
Dec 20, 2010 | 1999 Toyota Corolla
Aug 30, 2010 | 2000 Pontiac Sunfire
Mar 09, 2010 | 2006 Nissan Sentra
Sep 09, 2009 | Acura Cars & Trucks
1,914 people viewed this question
Usually answered in minutes!