Question about 2003 Mitsubishi Lancer

2 Answers

I have a 2006 mitsubishi lancer. The a/c works intermittently. Works the least the hotter the day gets. The presures are 25 low side & 145 high side @ idle. What are the proper pressures ? I beleive this systems runs @ lower pressures than the older cars. The high pressure switch works & cycles the cooling fans. the compressor sometime cycles and not @ others. Does anyone know of any usual suspects??

Posted by Anonymous on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mitsubishi Master
  • 22,331 Answers

Low on freon

Posted on Jul 26, 2017

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mitsubishi Master
  • 85,161 Answers

Those pressures are OK and within specs. I would suspect the cooling issue lies with the air temperature control blend door actuator and or the blend door sticking in the ducting due to warpage.

Posted on Jul 26, 2017

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 740 Answers

SOURCE: My service engine soon light is on on my 2004 Mitsubishi Lancer.

You can't guess with this vehicle take it to Auto-Zone they will check the code for free and get back to me. Good Luck

Posted on Dec 20, 2008

polarcycle
  • 1392 Answers

SOURCE: air conditioning compressor will not kick in,

If it is above 100PSI, you are over charged. Any thing under, should be normal to low. You probably need to get it checked by a professional to make sure it has the correct charge, and the compressor is getting power when the switch is turned on.

Posted on Jul 14, 2009

  • 159 Answers

SOURCE: I need windscreen wiper switch column mounted

I had the same problem in my Saab. Replace the column with the buttons and you should be good to go. Check with eBay and local junk yards for the part.

Posted on Dec 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is low side of air conditoner


There are 2 lines coming from the firewall on any vehicle that has ac. One is the high presure the other is the low presure. Follow each line until you find fill valve.

This valve is used to fill the system. It will be covered by a plastic cap that screws on. Each side, the high and low has one of these valves. Often the cap is labeled with an "L" for low or "H" for high. Another way to tell is to flip the caps upside down. The low presure side will always be the smaller of the 2.

Jul 05, 2014 | 2006 Ford F-150

1 Answer

I have a mitsubishi lancer 2006 1.6 liter.. the rpm is low and sometimes the engine turns off.. why?


@Cyril.. Try to adjust your cable wire in your trotle then set it up @ 900 rpm.. Well that what i did to my 2004 lancer oz.2.0L it works

Feb 15, 2013 | 2006 Mitsubishi Lancer

1 Answer

Low Beam Wont Turn on, High Beam Yes


I remember a similar problem, replaced the dimmer switch , problem solved, maybe its the same for you, autozone has a website, when you clickon this part, it tells you why it needs replaced, pretty cool , give it a shot, see what happens. tell the parts store you bought the light from what happened, they can help you, customer service is there job !

Jan 13, 2013 | 2006 Mitsubishi Lancer ES

1 Answer

I need to replace the wiring to my headlights in my 1990 mitsubishi lancer se, however I am unsure which wires are the earth, high and low beams.


if you have H4 headlight bulbs ( with 3 pins) looking at them from the front of the vehicle the pin on the right hand side of the bulb is earth, the center one is low beam & the one on the left hand side of the bulb is high beam, if you are still unsure use a test light to check......hope this helps.......cheers.

Jul 11, 2011 | Mitsubishi Lancer Cars & Trucks

1 Answer

I need windscreen wiper switch column mounted for 1998 mitsubishi lancer wagon. Low and high speed work but not intermittant


I had the same problem in my Saab. Replace the column with the buttons and you should be good to go. Check with eBay and local junk yards for the part.

Dec 09, 2009 | Mitsubishi Lancer Cars & Trucks

1 Answer

2002 Lancer 2002 A/C won't kick in at hot weather temperature during the Summer in Texas. It works perfectly at cooler temperature such as morning or cloudy day. The A/C also work while engineer is hot...


Okay, here are a few possibilities. First, they do make a High performance freon and carry it at Autoparts stores. Second, moderation. All A/C systems have a low pressure cutoff switch and a high pressure cutoff switch. You want to stay below the high limit. Freon is a gas and will generate more pressure when the outside air is hotter. The switches run $20 to $40 each. It may be possible to change to different pressure numbers without blowing a hose. You old switches could be weak.

Jul 02, 2009 | 2002 Mitsubishi Lancer

1 Answer

Windshield washer works intermittently,one day it works nexy day it doesnt, motor good,pumps good and getting power, dealer couldnt figure it out. Rear works usually Is it the washer pump not pumping or...


If the pump is working and hoses dont have any holes or kinks the only thing it could be is a clog.. Its a common problem and easily solved. Just take hose off water resevior and blow some air through it to blow out any clogs.

Dec 02, 2008 | 2002 Mitsubishi Lancer

Not finding what you are looking for?
2003 Mitsubishi Lancer Logo

Related Topics:

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

Marvin
Marvin

Level 3 Expert

85161 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...