Question about 1998 Ford Windstar
Car won't start; nothing when turning key, interior stuff comes on. My husband took out the starter and got it tested, ended up replacing the cellenoid. It still wouldn;t start at that point, so my husband checked all of the fuses and relays, nothing there. He ended up "jumping" the starter and it worked. We were able to drive it and restart it approximately six times. I drove to the grocery store this morning on the way to work and when I came out of the store, it wouldn;t start again. Any ideas what needs to be replaced now? We are thinking it's possibly the electric starter switch.
One problem that the 98 winstars ( 3,8L ) are prone to is the transmission range sensor. they are badly located and not well sealed. As a result corosion...
The starter solenoid wire ( red/ light blue ) runs throught the range sensor before reaching the ignition switch.
Try shifting back and forth between Park and L1 rapedly at least 5, 6 times and then try starting in Neutral.
If it starts the TRS is easy to replace and accesible.
( The TRS is also responsible for the transmission going into irradical kick down mode )
Posted on Apr 21, 2010
I would check the battery to see if there is a bad cell in it first and then if you can get it started again have your husband to take the positive cable off the battery while it is running and if the car dies then it is the alternator
Posted on Jan 05, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Feb 03, 2015 | Ford Cars & Trucks
Feb 23, 2013 | Cars & Trucks
Apr 12, 2011 | 2002 Ford Windstar Cargo
Sep 20, 2009 | 1998 Ford Windstar
Sep 16, 2009 | 1998 Ford Windstar
Feb 09, 2009 | 2000 Ford Windstar
2,336 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: