Question about 1994 Geo Metro
1994 Geo Metro 1.0L, A/T, A/C. At idle the engine vibrates horribly and when it goes into gear the vibration gets worse. Giving the car a little gas makes the vibrations stop. This engine is a rebuild and was swapped in. I have done this swap before and it has always been successful. This time I got the vibrations. Any Help would be appreciated.
Hello. i have a 94 geo and the timing belt broke. when i replaced it , it had 2 timing marks on the top gear so i picked one. mine runs exactly like you are saying and i found out that i picked the wrong mark. the mark with 60 on it is for the 3 cylinder and the mark that has 80 on it is for 4 cylinders. you may pull your plastic cover off and check it. hope it helps.
Posted on Jun 08, 2009
Check all motor mounts first. if they are ok then check to make sure all cylenders are firing. try pulling one plug wire off the spark plug and see if the engine changes sound or anything. if it does, put the wire right back on then move to the next one and repete. if you pull one and it does not change then that plug is not firing. could be caused by a crack in the porcelian in the plug or bad plug wire connection or bad wire
Posted on Mar 18, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Sep 11, 2014 | 1994 Geo Metro
Mar 18, 2013 | 1994 Geo Metro
Dec 17, 2017 | 1994 Toyota Corolla
May 30, 2011 | 2002 Subaru Outback
Nov 27, 2010 | 1994 Geo Prizm
Jun 27, 2009 | 1994 Ford Escort
Apr 07, 2009 | 2002 Dodge Neon
Mar 09, 2009 | 1994 Chevrolet Cavalier
Jun 03, 2017 | 1994 Geo Metro
1,078 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: