Question about 1998 Ford Windstar
The passenger side window and lock is the only one that does not work. I have checked the fuse,and changed the switch to no avail. Now I am trying to locate the relay that supplies power to the window but they are not labeled. Is there a diagram that can identify which one I should check, if that doesn't work then what other options do I have.
Posted by Anonymous on
Check the wiring inside the rubber boot from the body to the door . Opening an closing the door a million times can cause these wires to break . Testing the electrical circuit using a DVOM - digital volt ohm meter before replacing parts is the proper way to diagnose automotive electrical circuit's . You can find free wiring diagrams here http://www.bbbind.com/free_tsb.html Enter vehicle info. year , make , model an engine size . Under system click body & accessories ,then under subsystem click on power locks or windows ,which ever you want to diagnose first .
Suggest you watch this video as well
Electric Testing Techniques You Need to Know
Posted on Oct 09, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 92 F150 power window and locks
try taking apart and cleanig all contacts first. make sure you are getting power to switch. Sounds more switches are going bad. They usually last about 5 to 7 years before they start going out.
Posted on Jun 11, 2008
SOURCE: power windows don't work
I had the same problem. There was a wire broken into where the wires go from the door to the inside of the cab. There is a rubber boot over the wires that you have to take loose to see the wires. I changed fuses, checked switches, and relays but i finally found the problem. I hope this helps. DVPNN
Posted on Apr 13, 2009
SOURCE: Power windows on ford explorer
The main reason for this concern, especially if the door is used quite often and/or the vehicle has higher mileage is a break in the wiring going from the drivers door to the body. If you access this area by pulling the protective rubber back, shine a flashlight on these wires and look for a break (open circuit). look for shiny spots from the open copper wire. The stress from the door opening and closing is what causes the break and often you will find more than one broken wire. It will usually be a heavier gauge wire that doesn't flex as easily. Good luck, if you need more info, please ask.
Posted on Apr 12, 2011
Tips for a great answer:
Aug 24, 2018 | Honda Cars & Trucks
Jan 10, 2015 | Cars & Trucks
May 04, 2014 | 2000 Chevrolet Blazer
Jan 14, 2014 | Cars & Trucks
Nov 09, 2017 | 2008 Chrysler Town & Country
Oct 28, 2012 | 2001 Oldsmobile Aurora
May 23, 2012 | 1995 Ford Taurus
Sep 11, 2011 | 2004 Saab 9-3
Aug 26, 2011 | 2009 Chevrolet HHR
Mar 15, 2011 | 2005 Ford F-150
94 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: