Question about 1991 Peugeot 405
Ihas just recently purchased a peugeot expert van1.9 deisel 1997 R plate and the heater/blower has stopped working . i have tried checking the fuse but with no plan of which fuse is which i'm not having much sucess. i've also tried to feed alive wire from the battery to the power on what i believe isthe blower but no success. i've tried testing all the live wires that seem to connect to the blower no success. i need areally easy to follow instructions on how to solve this problem, please note it is peugeot expert van 1.9 deisel 1997 on r plate. this was not in the category section
Hi, had same problem twice with my 98 expert , first time it was heater control board(the slider sends a varying voltage thru the thin green wire at the motor plug, to a semi conductor encased in an ally heatsink when checking motor operation check thick red wire for 12v, and thin green for 1.5-4.5v, depnding on slider movement, and thick green for earth conn) , second fault was overheated conns both at motor conn and at relay(mine was bright green cased one behind glovebox), Terry
Posted on Nov 09, 2009
I have a peugeot expert mini bus van 1999 found out the heater blower not working. i removed the blower unit and tested the motor and it was ok.and the ploblem i found was there is no power going to the red wire that connects to the fan blower i checked the fuse box and as for as i know all is ok but i have no idea what fuse it is connected to because i have no diagramfor it and were to go from here
Posted on Aug 18, 2011
1 of 2 things i always come across, 1st thing is the slider switch, then the variable resistor.
Posted on Aug 16, 2009
Agreed with above BUT FIRST check the RELAY
Mine had simply FRIED because of a bad connector. Its eight pounds for a new one and wish I had tried it first before stripping down the dash and changing the heater controls.
For the benefit of doubt here is what the heater control looks like stripped out of a Peugeot Expert van.
Yes I pulled all the dash apart its not that difficult tamy heater blower on my peugeot expert is not worki - 11_2_2012_5_38_52_pm.jpgbr>
You will need a special screwdriver for this type of grub screw. Note tmy heater blower on my peugeot expert is not worki - 11_2_2012_5_39_56_pm.jpgo once you have the tool you have access to all
Never got round to cleaning up the unit simply replaced with scrap yard second SO I will sell this part on ebay for about thirty pounds
It may well be ymy heater blower on my peugeot expert is not worki - 11_2_2012_5_41_43_pm.jpgd to strip it out but as I said LOOK FIRST at that relay which incidently should be GREEN for 25amp
Mine changed to black because they sold me a 40amp version
Dangerous Maybe - but will keep an eye on it. I think they only had a 40amp in stock.
But many thanks to the guys above who posted first because you got me on the right track to this one.
Posted on Nov 02, 2012
Cheers for that. I had the same problem and it was indeed the relay.
Posted on Dec 21, 2012
I had same problem with my 1997 1.9D Expert. I took out the blower by removing 3 screws and disconnecting the 3 wire connector. I connected to a power source 12V: nothing happend. First thought was fan needs replacement. I decided to go more into the deep and took the plastic cover off by removing 1 screw. I found that 1 of the brushes was stuck in its holder. Therefore no contact came to the collector. I managed to get the brush moving again and problem solved :)
Posted on Nov 22, 2012
When you don't have 0-4v voltage on thin green (sometimes thin white) wire on the fan plug, probably you have problem with control panel (slider). Replace Zener diode. you need 7,5V diode. For example BZX85C7V5 or BZX55C7V5. I think original is bigger one. I bought smaller and it works. It costs couple cents.
BTW, your original resistor looks different than this on the picture. I replaced it for stronger, but it wasn't necessary.
Posted on Aug 10, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Dec 16, 2012 | Cars & Trucks
Dec 10, 2010 | Peugeot 405 Cars & Trucks
Mar 07, 2010 | 1991 Peugeot 405
Nov 21, 2009 | 1997 Dodge Ram 2500 Club Cab
Nov 19, 2009 | 2005 Peugeot 405
Sep 23, 2009 | Peugeot 405 Cars & Trucks
Apr 09, 2009 | 1991 Peugeot 405
24,179 people viewed this question
Usually answered in minutes!