Question about 1999 Peugeot 206
Posted by Anonymous on
In this model, the gearbox should be fitted with speed sensor, as it provides the info of vehicle speed to the instrument panel(dashboard) by means of speedometer and the total distance covered. So, does the speedometer work proberly, does the needle move correctly? If yes, you have to change the instrument panel. if the answer is no, then the speed sensor is not working, either the sensor itself or one of its wires is broken. Notice that this sensor is a hall-effect type, which means that there are 3 pins on the sensor , 1st is 12V supply, 2nd is 0V (earth) 3rd is a signal wire that transfers signal to the points I mentioned above.
Posted on Jun 01, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Torque setting for peugeot 206
If you have normal 1.6 liter 206:
max bolt lenght:176,5mm
20Nm and aditional 240°
1,6 liter 16valve engine
max bolt lenght:122,6mm
20Nm and aditional 260°
Posted on Sep 26, 2009
there should be a key switch inside the car somewhere you need to turn it to the off position with the ignition key
(it will probably be some where on the dash, in the glove box or center console)
Posted on Dec 08, 2009
SOURCE: peugeot 206 cc fan belt change
hi ive a peugeot 206cc 02 reg, the STOP light keeps flashing ive checked the normal oil and water but alls ok so whats the problem still runs fine and temp stays where it should??? any tips??
Posted on Dec 28, 2009
hi the first thing you need to check is the fuse in the fuse box if this is ok then the chances are the brake light switch needs replacing or it may have come loos what you need to do is get down on your knees so you can get a close look at the brake pedal then if you follow the brake pedal all the way to the top just before it goes through the bulk head into the engine you will then see a switch attatched to the very top of the brake pedal it will have 2 or 3 wires coming from it so check if this is fitted correctly also you could remove it and press the switch by hand and then see if the brake lights work that way.
If they do then try fitting it again and you may be able to adjust it slightly so check this if on the other hand it still dont work then you need to get it replaced.
Let me know how you get on or if you need further assistance ok
Posted on Jan 15, 2010
Tips for a great answer:
Apr 25, 2014 | 2001 Peugeot 206 1.6
Sep 25, 2012 | 2001 Peugeot 206 1.6
Jun 14, 2012 | 1999 Peugeot 206
Feb 23, 2012 | 2005 Peugeot 206 1.4
Jul 28, 2008 | 2005 Peugeot 405
220 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: