Question about 2013 Nissan Rogue
Where is thhe emergency flasher located on a 2013 Nissan Rogue?
It is along side the turning flasher unit under the dash. best way to find it , turn on turning signal unit and follow clicking noise.
Posted on Oct 14, 2014
Here is what the service manual says. Looks like it is not a flasher relay but a function of the body control module.
TURN SIGNAL AND HAZARD WARNING LAMP SYSTEMSystem Description OUTLINE Turn signal lamp and the hazard warning lamp is controlled by combination switch reading function and the flasher control function of BCM.
TURN SIGNAL LAMP OPERATION - BCM detects the combination switch condition by the combination switch reading function. - BCM supplies voltage to the right (left) turn signal lamp circuit when the ignition switch is turned ON and the turn signal switch is in the right (left) position. BCM blinks the turn signal lamp.
HAZARD WARNING LAMP OPERATION BCM supplies voltage to both turn signal lamp circuit when the hazard switch is turned ON. BCM blinks the hazard warning lamp.
TURN SIGNAL INDICATOR LAMP AND TURN SIGNAL SOUND OPERATION - BCM transmits the turn indicator signal to the combination meter with CAN communication while the turn signal lamp and the hazard warning lamp are operating. - Combination meter outputs the turn signal sound with the integrated buzzer while blinking the turn signal indicator lamp according to the turn indicator signal.
HIGH FLASHER OPERATION (FAIL-SAFE) - BCM detects the turn signal lamp circuit status by the terminal current value. - BCM increases the turn signal lamp blinking speed if the bulb or harness open is detected with the turn signal lamp operating. NOTE: The blinking speed is normal while operating the hazard warning lamp.
Posted on Oct 13, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
it's basically a stand alone relay... most times... look for a relay by itself and often round. my ford winstars flasher relay was actually located in the fuse box under the drivers side dash. it was blue and larger then the other relays so that may be a clue to you.
Please take a moment to rate this solution
Posted on Feb 02, 2009
I had the same problem twice before. Solved it the same way both times. In my case it was the Hazard switch at the top of the steering column. It was stuck. I knew it was that because the signal lights had been functioning perfectly until I parked my car alongside the road with the hazard lights on to do some nighttime fishing and sip a little white lightnin'. (just kiddin' about the white lightnin')
When I got back in my car to go, I turned off the hazard lights but I had no turn signal lights! So I kept pushing that hazard button up and down for about 30 times with my left turn signal arm down until it started working again. So after having this happen to me twice, I learned a valuable lesson: Don't ever use hazard signals in this car.
Posted on Mar 29, 2009
Toyota Pick-ups, Land Cruiser, and 4 Runner 1997-00
The turn signal flasher is usually located in the convenience center, under the dash, on the left side kick panel. In all cases, replacement is made by unplugging the old unit and plugging in a new one.
Hope helped with this (remember rated this help) Good luck.
Posted on Nov 09, 2009
For 1998 Ford Truck Explorer 4WD 4.0L EFI SOHC 6cyl the Flasher is located in front seating area, driver side, behind dash, mounted on steering column.
Both the turn signal flasher and the hazard warning flasher are mounted on the fuse panel on the truck. To gain access to the fuse panel, remove the cover from the lower edge of the instrument panel below the steering column. First remove the two fasteners from the lower edge of the cover. Then pull the cover downward until the spring clips disengage from the instrument panel.
The turn signal flasher unit is mounted on the front of the fuse panel, and the hazard warning flasher is mounted on the rear of the fuse panel.
Posted on Jan 26, 2011
Tips for a great answer:
Mar 31, 2018 | Nissan Cars & Trucks
Feb 27, 2018 | 2013 Nissan Rogue
Oct 05, 2016 | 2013 Nissan Rogue
Jan 11, 2016 | 2009 Nissan Rogue SL
Oct 08, 2015 | 1992 Jeep Cherokee Limited
Jul 05, 2014 | 1988 Plymouth Reliant
Nov 18, 2011 | 1998 Chevrolet Camaro
May 11, 2010 | 1997 Mercury Grand Marquis
Jul 09, 2009 | 1994 Pontiac Firebird
Apr 16, 2009 | 1997 Lincoln Mark VIII
1,306 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: