Question about 2003 Ford Focus
Can I bypass the ac pulley in my 03 Ford focus se 2.0 split port with the serpentine belt made for no ac pulley?
An easier fix. Check with your local parts store to see if Motormite/Dorman makes an AC Bypass pulley. It goes in place of your compressor and you don't have to change the belt routing.
Posted on Nov 17, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Unplug wires going to the compressor, and let it freewheel, if it's not noisy in that mode. A/C compressor won't kick in if not connected. A lot less hassle than going the other way.
Posted on Nov 23, 2008
simple trick provided you can do this by running some twine around your pulleys allowing for1-2 inches less for slack adjuster an that will pretty close.or they may have for that system without ac meaning the condenser unit.
Posted on Nov 28, 2009
My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Posted on Mar 06, 2010
I don't know of a practical way to get around this problem. If just the bearing inside of the clutch pulley is bad [which would first be noisy then might lock up and burn off the belt] then you may be able to have just that bearing replaced so your belt will work again. I've replaced several of these bearings over the years...they are pressed in place and do require a bit of skill and a good press to replace. Sometimes though the bearing will go bad and damaged the nose of the compressor badly enough that the only fix is to replace the compressor. The only real way to tell is to examine it all once the clutch pulley has been removed from the compressor. Hope this helps a bit!
Posted on Jul 09, 2010
Tips for a great answer:
Aug 15, 2018 | Ford Cars & Trucks
Jul 03, 2017 | Ford Focus Cars & Trucks
Nov 24, 2015 | Ford Cars & Trucks
Aug 10, 2014 | 2000 Ford Focus
Aug 03, 2014 | Cars & Trucks
Apr 28, 2011 | Pontiac Bonneville Cars & Trucks
Dec 30, 2010 | 2003 Nissan Altima
Nov 29, 2009 | 2004 Ford Focus
Nov 28, 2009 | 2001 Ford Taurus
Oct 24, 2009 | 2003 Ford Focus
2,132 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: