Question about 2006 Mitsubishi Lancer

1 Answer

Hi I have a 1)SRS Light,2)unavoidable messages on CD player display and 3) passenger belt light is stays on even though the passenger wear it. I lost my key inside the care, CD player was running and battery discharged, started the car with the jumper and after that this 3 problems came.Please help me with the possible cause. Thanks, Ravi

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 24 Answers

You will have to get your code for this

Posted on Jan 24, 2015

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
MrScary66613
  • 1990 Answers

SOURCE: Car just stopped (sudden stop) when it's running on the road.

You will need to Change the Fuel Pump and Fuel Filter and Also Check the Belt Tension. If it is even a little loose it will not Charge the Battery and could cause this problem also. Let me know what you find.

Posted on Jan 25, 2009

  • 6 Answers

SOURCE: SRS light came on in 99 Mitsubishi Diamante

Yes there is a problem with your airbag system. Take it in asap

Posted on Mar 13, 2009

  • 88 Answers

SOURCE: Car shakes and is running on 2 cylinders.

cheap fix number one yake a timing light and check for missing fire does car run ok for a few seconds when cold sounds like a bad module

Posted on May 21, 2009

  • 4357 Answers

SOURCE: Brake light, battery light, antilock brake light coming on

this issue sounds like a grounding issue, teh main clue being everything gets dimmer. sometimes an additional ground is a faster repair than finding and resolving under dash issues.

This issue will likely NOT be battery or alternator.

Love the right rear tire clue, and it should not be related..

Posted on Sep 07, 2009

  • 333 Answers

SOURCE: endeaver srs light is on after replacing battery

The light is on because the SRS computer detected excessively low voltage, likely right before your battery failed/was replaced.
To clear the light you will need to take it to a dealer or a repair shop with a Mitsubishi-compatible SRS scantool.

This happens so frequently, I never charge customers for clearing SRS lights that are related to battery changes (code will be IG low voltage A and B).


Posted on Oct 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Seat belt light flashes after seat belt is on


The new 2013 Bentley Mulsanne Mulliner has the same thing.I know on the Bat Mobile it means the ejector seat is not fully charged.

The only generic answer I can conclude with information you provide is ;

1) The passenger seat of a newer general motors car

2) The seatbelt light does not light up when the seat is not occupied

3) The passenger side Airbag (SRS) has been turned OFF

4) While occupied , the seatbelt light on the insrument cluster lights steady

5) when the seatbelt is active (buckled with a passenger) the light flashes.

6) anybody?

Mar 31, 2013 | Cars & Trucks

1 Answer

Reset srs light after replacing seatbelt


To reset the SRS light on an Acura Integra, pull down the SRS service connector. Unplug this connector so you have access to jump the harness. Start with the ignition OFF. Jump the SRS plug. Turn the ignition ON. The SRS light will come on then off.------------------------------------------------------------------------------
autel maxidas ds708

Jan 14, 2013 | 2007 Ford Explorer Sport Trac

1 Answer

What does SRS lit up on the dashboard mean. 1995 accord wagon.


the SRS stands for Supplemental Restraint System. Most people call it the air bags but the SRS system includes all of the sensors and control units for air bags, seat belt pre-tensioners and passenger detection systems on cars that are equiped with themeach time you start the car up the SRS control unit will do a self-test of the system to make sure all of the sensors are working properly. The SRS light will stay on while that test is conducted. If all is well and everything passes the on-board test the light will go out in about 7 seconds. If something is wrong the light will stay on.whenever a failure is detected for any reason,the SRS light is turned on and the system is shut off. The air bags will not be deployed when the SRS light is on.They call it a Supplemental Restraint System because your seat belts are your primary restraint system.

Mar 22, 2011 | Honda Accord Cars & Trucks

2 Answers

I have a 2002 Honda Accord EX-4. The SRS light came on and stayed on. I've owned the car since new, and it's never been hit.I have three questions 1.) Could it be something with the seatbelt? 2.)If not,...


Here's a quick check list for most common cost of SRS / Air bag problem.


Dirty contacts on driver and passenger seat belt buckles

Dirty contacts on seat belt connectors (under seats)

Dirty contacts on driver and passenger sides weight sensors (under seat)

Seat covers

Weight on passenger seat

(Example: grocery package trigger SRS / Air Bag light on the way home.)

I recommend you to pass an vacuum over the contacts and use CRC electronic parts cleaner to rule out connectivity2_bing.gif problem.

I DO NOT disconnecting the negative battery connector to clean the code(s)

Without the code(s) the dealer will takes "BILLABLE" time to reproduce the problem.

======

Please rate me answer if it is useful to you.


Cheers,

Mustgo

Nov 17, 2009 | 2002 Honda Accord

3 Answers

What is the SRS light? I have 1996 honda accord


the SRS stands for Supplemental Restraint System. Most people call it the air bags but the SRS system includes all of the sensors and control units for air bags, seat belt pre-tensioners and passenger detection systems on cars that are equiped with them

each time you start the car up the SRS control unit will do a self-test of the system to make sure all of the sensors are working properly. The SRS light will stay on while that test is conducted. If all is well and everything passes the on-board test the light will go out in about 7 seconds. If something is wrong the light will stay on.

whenever a failure is detected for any reason,the SRS light is turned on and the system is shut off. The air bags will not be deployed when the SRS light is on.

They call it a Supplemental Restraint System because your seat belts are your primary restraint system.

hope that answers your question

Nov 05, 2009 | 1996 Honda Accord

2 Answers

SRS light


Here's a quick check list for most common cost of SRS / Air bag problem.

Dirty contacts on driver and passenger seat belt buckles

Dirty contacts on seat belt connectors (under seats)

Dirty contacts on driver and passenger sides weight sensors (under seat)

Seat covers

Weight on passenger seat
(Example: grocery package trigger SRS / Air Bag light on the way home.)

I recommend you to pass an vacuum over the contacts and use CRC electronic parts cleaner to rule out connectivity problem.

I DO NOT recommend disconnecting the negative battery connector to clean the code(s).

Without the code(s) the dealer will takes "BILLABLE" time to reproduce the problem.

======

Please rate my answer if it is useful to you.

Cheers,

Mustgo

Aug 19, 2009 | 2000 Acura TL

2 Answers

SRS light came on by itself and stays on now.


there is a fault in the system thats why light is on take car to dealer for diognostic checks,( you dont want the air bag popping up on you)

Jul 30, 2009 | 2001 Lincoln LS

3 Answers

SRS light stays on


Check horn relay.

===

Check linkage / cable from throttle plate to a black unit that control the movement while on cruise control.

===

Here's a quick check list for most common cost of SRS / Air bag problem.

Dirty contacts on driver and passenger seat belt buckles

Dirty contacts on seat belt connectors (under seats)

Dirty contacts on driver and passenger sides weight sensors (under seat)

Seat covers

Weight on passenger seat
(Example: grocery package trigger SRS / Air Bag light on the way home.)

I recommend you to pass an vacuum over the contacts and use CRC electronic parts cleaner to rule out connectivity problem.

I DO NOT recommend disconnecting the negative battery connector to clean the code(s).

Without the code(s) the dealer will takes "BILLABLE" time to reproduce the problem.

======

Please rate my answer if it is useful to you.

Cheers,

Mustgo

Apr 24, 2009 | Honda Civic Cars & Trucks

2 Answers

My 2003 ford expo has a constant airbag light lit after starting the veh. I have a new sensor, can't figure out were 2put it.. Please help.


first, you need to read the Lamp Fault Code, LFC from the flashing light. Here's how:

Lamp Fault Codes
When the restraints control module (RCM) detects a system fault, it will cause the air bag indicator to flash a coded sequence: a lamp fault code (LFC). The code is two digits. The first digit is flashed with a 0.5 second interval between pulses. There is a 2 second pause before the second digit is flashed, which also has a 0.5 second interval between pulses. There is a 5 second pause between each display of an LFC.
Each LFC is flashed five times after which the air bag indictor will remain lit for the remainder of the key-on cycle. If there are multiple LFCs, each LFC will flash in order of priority.
-------------------------------------------------------
The fault could be in the air bag circuits, the canopy circuits, the pretensioner circuit on the seat belts, etc.
Report back with code.

here's some of system.

SECTION 501-20B: Supplemental Restraint System 2003 Expedition/Navigator Workshop Manual
DESCRIPTION AND OPERATION Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS) The air bag supplemental restraint system (SRS) is designed to provide increased collision protection for front seat and second row outboard occupants in addition to that provided by the three-point safety belt system. Safety belt use is necessary to obtain the best occupant protection and to receive the full advantage of the SRS.
This vehicle line contains dual stage deployment (advanced restraint system) driver and front passenger air bag modules. These vehicles can also be equipped with optional safety canopies that deploy from the A-pillar to the C-pillar upon a side impact or if a rollover condition is detected. If equipped with safety canopies, a unique restraints control module (RCM) is used.
See the following illustration for deployable component location.
Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS) Deployable Components a55c8c5.gif Item Part Number Description 1 611D10 Passenger air bag module 2 042D94 Passenger side safety canopy module 3 042D95 Driver side safety canopy module 4 61203 Driver safety belt buckle and pretensioner 5 043B13 Driver air bag module 6 14A664 Clockspring 7 61202 Passenger safety belt buckle and pretensioner

4ee7996.gif
Item Part Number Description 1 14B321 Restraints control module (RCM) 2 14B345 Second row, C-pillar side impact sensor 3 14B345 Second row, C-pillar side impact sensor 4 14B416 Driver seat track position sensor 5 14B345 Front row, driver door, side impact sensor 6 14B006 Front impact severity sensor 7 14B345 Front row, passenger door, side impact sensor

Apr 23, 2009 | 1997 Ford Expedition

1 Answer

SRS


SRS stand for Supplymentary Restraint System, The purpose of the SRS light on your instrument panel is to alert you of a potential problem with your supplemental restraint system. It should blink seven times when you turn the ignition switch to ON or START and go OFF. A possible fault in the system can lead to any of the following: (a) The light does not come on when you turn the ignition ON. (b) The light stays on after the engine starts. (c) The light comes on while you are driving. Apart from the conventional causes of these faults (faulty airbag system), majority of the light indicator problem has been attributed to ignorance while fixing or repairing mechanical and/or wiring systems within the vehicle. If the SRS indicator light alerts you to a problem, have the supplemental restraint system inspected as soon as possible. If you ignore this indication, the airbags might not inflate when you need them. Likely Causes:
  • Steering wheel modifications
  • Faulty driver/passenger seat sensors for your airbag system (located under the seats)
  • Faulty seat belt mechanism
  • Tampered system components or wiring (e.g battery jumpering)
* Sometimes, a little adjustment of your seat belts and/or seat positions might fix the indicator problem over time (if the sensors are not faulty).
Precautions:
  • Do not modify your steering wheel or any other part of the supplemental restraint system. Modifications could make the system ineffective.
  • Do not tamper with the system's components or wiring. This could cause the airbags to inflate inadvertently, possibly injuring someone very seriously.
  • Tell anyone who works on your vehicle that you have a supplemental restraint system. Failure to follow the procedures and precautions in the official service manual could result in personal injury or damage to the system.
  • If all sensors are ok, the system can be reset using appropriate tools; refer to specially trained technicians.
Cheers Fred Omorogbe (reference: https://techinfo.honda.com/rjanisis/pubs/om/PA9696/PA9696A00015A.pdf)

Sep 08, 2008 | 2001 Mercedes-Benz E-Class

Not finding what you are looking for?
2006 Mitsubishi Lancer Logo

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

Marvin
Marvin

Level 3 Expert

85160 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...