Question about 1992 Mitsubishi Pajero

Open Question

Can anybody tell me how to remove and replace the glass seal on the Sunroof of my 1992 Pajero SWB.

The sunroof is the tilt up type with the manual turn mechanism.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 15 Answers

SOURCE: How do i manually close a sunroof for a mitusbishi

Depending on the year of your vehicle....
Earlier models had a sunroof wrench. The manual states that ..."the electronic sunroof system cannot be operated manually. The sunroof wrench that was used in previous models is not provided".

Now that may mean that if you had the wrench it could be operated manually.

I did find something else here :
NOTE: If there is a problem with the sunroof motor so that the
roof lid glass cannot close fully, use an Allen wrench to turn the
gear section of the sunroof motor to fully close the roof lid
glass.

Access seems to be just above the sunroof switch.

Posted on Sep 02, 2009

Ad
Travelboy
  • 12 Answers

SOURCE: 2003 Mitsubishi lancer oz rally sunroof fuse?

Hi there,

Not sure if this will help or not. but we have a silver 2003 oz rally. Our fuse for the sunroof is in the fuse box next to the battery, under the hood.

so check the box inside the car, and the two under the hood.

hope that help some, and you can find it.

Cheers

Posted on Sep 24, 2009

  • 770 Answers

SOURCE: my friend has jus bought a 1992 Pajero, 2.5 auto,

He need not stop to change from 4x4 hi to 2wd. He can also go from 2wd to 4x4 hi "on the fly" as long as the front hubs are locked, he is going straight and maintaining a steady speed. If the hubs are manually locking, he must exit the vehicle and lock the hubs. If they are automatic locking, in order to go from 2wd to 4x4 he must stop, put the vehicle in 4wd hi and pull off. Once he starts moving, the hubs will automatically lock, he can then switch from 2wd to 4wd hi and vice versa "on the fly". To unlock the hubs, he will need to stop, put the vehicle in 2wd and back up 3 ft. (remember, this is on automatic locking hub models). Hope this is helpful!

Posted on Nov 05, 2009

  • 42 Answers

SOURCE: Sunroof is tilt opened and won't close. Fuse is

The switch could simply be bad. Take the switch out, disconnect the wire harness from the switch, take a paper clip and hotwire the two metal prongs together to activate the closing position. This will tell you if the switch is bad.
If this doesn't work you may try pushing the glass closed manually, the only problem being that you will not be able to close it tightly enough to keep out the rain and the motor will still think that it is in the open position. After you find the problem and you repair it, you will need to open the glass back to the open position to restart.
If the motor is bad and needs to be replaced, let your local dealership do it, because you do not want to be responsible for pulling your ceiling down. Ceiling boards are brittle and can snap very easily. The carpet can be pulled away very easily. The clips love to snap under pressure. If your local dealership breaks anything while repairing it, they will be responsible for replacing it. Expect to spend about $250-350 in labor plus parts.

Posted on Jan 02, 2010

ftw1952
  • 10319 Answers

SOURCE: i have a 1993 pajero and the sunroof does not open

More than likely the gearing is worn out or loose. If one side seems to retract more than the other I would close it and disconnect it till its repaired. It can jar opened on a raining day you know ever so slightly making a mess for you

Posted on Jan 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wifes sunroof is open and will not close. Checked fuse it has pwr, removed switch it does not have power ... a ground problem at the sunroof motor...where is that?


First off this is controlled by a module (computer) The switch would only have five volts . 5volt reference voltage from the control module . Not knowing how to test the electrical circuit's for this could be expensive . Short out the module or 5 volt ref. voltage circuit inside the module.
Your best bet , take it to a qualified repair shop . Look at a wiring diagram here http://www.bbbind.com/free_tsb.html Enter vehicle info. year , make , model and engine size . Under system click on body & accessories ,then under subsystem click sun roof . Then click search button then the blue link . Now tell me you under stand what's happening here .

Power Sunroof System Components
The power sunroof system consists of the following components:
• Sunroof control module
• Sunroof Opening Position Switch (SOPS)
• Sunroof switch
• Sunroof motor/actuator
• Sunroof glass (spoiler type, with glass sliding above roof)
• Sunshade
• Rail and track assembly upon which the sunroof glass rides
• Power supply for the sunroof control module: SUNROOF 20 A fuse
• Ground from G302

Sunroof Opening Position Switch (SOPS)
The SOPS tracks the position of the glass through 2 limit switches:
• Soft stop limit
• Vent limit
The sunroof control module monitors the limit switches and based on the inputs determines the position of the sunroof glass. As a limit switch closes, the 5 volt reference will be shorted to the sunroof limit switch low reference circuit, pulling down the 5 volt reference to 0 volts.
The sunroof control module understands the position of the sunroof glass based on the different input combinations through the sunroof limit switch soft stop signal and sunroof limit switch open vent signal circuits.

Power Sunroof Does Not Close
Perform the Initialization/Teach Process any time a new sunroof motor actuator is installed in the vehicle or any time an existing sunroof motor actuator is removed from the vehicle. Refer to Sunroof Motor/Actuator Initialization/Teach Process .

Oct 23, 2017 | Pontiac Cars & Trucks

1 Answer

How do I close a partially open sunroof on a 2010 lexus 350RX


You must remove the electric drive motor located at the front of the sunroof under a plastic cover, then close the glass and reinstall the motor drive.

Mar 23, 2012 | 2003 Jeep Liberty

1 Answer

06 srx sunroof doesnt work


Sorry Bill but you don't the tool's or knowledge to take on this job . Control module's involved.
Which one does your vehicle have ?
Power Sunroof System Components -- CF5
The power sunroof system consists of the following components:
• Front glass control module and motor assembly
• Front sunshade control module and motor assembly
• Sunroof switch
• Front glass panel
• Front sunshade
• Power supply for the front glass control module and motor assembly logic: RAP relay
• Power supply for the power sunroof system: SUNROOF MOD fuse 40 A
Power Sunroof System Components -- C3B
The power sunroof system consists of the following components:
• Front glass control module and motor assembly
• Front sunshade control module and motor assembly
• Sunroof switch
• Front glass panel
• Front sunshade
• Rear sunshade control module and motor assembly
• Rear sunshade switch
• Rear sunshade
• Rear fixed glass panel
• Power supply for the front glass control module and motor assembly logic: RAP relay
• Power supply for the power sunroof system: SUNROOF MOD fuse 40 A

Aug 30, 2017 | 2006 Cadillac SRX

1 Answer

I need to make sure the sunroof on my explorer is closed. The open button opens the solid cover and the glass. The close button closes the glass the the tilts the glass. How does one just close the...


Are you holding the close button? If you just press the close button once (while the sunroof is open), it should close without then tilting the glass.

May 04, 2011 | 2005 Ford Explorer

1 Answer

95 GRND CHEROKE sunroof supports have come loose and it leaks.


The bigest problem with this model jeep sunroof is the cable conduit in the rear of sunroof is broken loose. can be accesed by removing the headliner. But the tracks are accessed from the sunroof opening after removing the glass. the part department at the dealership can give you a breakdown basicly the only replacable parts are the tracks, Price about $200.00 each.

Oct 03, 2009 | 1995 Jeep Grand Cherokee

1 Answer

2005 mazda 3 sunroof


H Kim -

The "gearbox" is unfortunately under the headliner with no easy access. If you are also experiencing a clicking sound when the motor is activated, the regulator track had slipped position and will need to be reset.

I have been through this problem twice now. The first time the motor / gearbox came loose from it's mounts, began slipping (click, click,click), very nasty sound. I remounted the motor with threadlock on the screws, but alas.. two years later (mine's 2006) it slipped again.. I don't know why yet, I need to drop the headliner once more and have a look. If you would like a copy of your FSM, drop me a line.

Here's the RESET procedure from the FSM, absolutely gospel, no other way to fix it:
Sunroof Motor Assembly Note: Note • If the guide is removed, initial position setting of the sunroof motor will be required. After installing the sunroof unit, perform initial position setting using the following procedure. 1. Press the TILT UP switch to fully tilt up the glass panel.
2. When the glass panel reaches the fully tilt up position, temporarily release the TILT UP switch and press it again for approx. 13 s continuously. Continue pressing the switch until the glass panel automatically stops at the fully tilt up position after reaching the mechanical lock position.
3. When the glass panel stops at the fully tilt up position, temporarily release the TILT UP switch, then press it again within 5 s and hold.
Note • Press the TILT UP switch continuously until the glass panel opens to the fully open position, returns to the fully closed position and then stops. 4. Release the TILT UP switch when the glass panel stops at the fully closed position.



ALSO, Here's the clearance adjustment specs for having the glass panel in the correct resting position:


GLASS PANEL ADJUSTMENT
1. Fully close the glass panel.
2. Measure the gap and height difference between the glass panel and the body.
3. Loosen the glass panel installation screws and move the glass panel to adjust.


Standard clearance a: 0.2-2.2 mm {0.008-0.08 in} b: 0 mm {0 in} 4. Tighten the screws.
5. Insert any available thin plastic card between the weatherstrip and the body, and verify that they are sealed. (There is resistance when the plastic card is moved.)


• If they are not sealed, perform Steps 3-4 and adjust again.

Aug 31, 2009 | 2001 Mazda Tribute

1 Answer

How do you remove the sun shade on the sunroof of a 1996 Audi A4?


The sunroof assembly has to be removed from the car before the shade can be removed.

Start with the sunroof glass, put the glass in tilt mode and remove the plastic covers hiding the bolts. Mark the bolts with white out so they go back where they were, remove the 6 T25 torx bolts. Push the glass out from the top and remove the glass. This should allow you to remove the shade.

Apr 16, 2009 | 1996 Audi A4

1 Answer

1992 Volvo 940 Gl Sunroof Problem


to find out if it is off its track you can remove the cover between the rearview and the sunroof that is the motor/drive assembly. there is a slotted pin in this assemply that you turn with a screwdriver to move the sunroof manually if it wont move manually then you have a bigger issue. sometimes thie drive assembly screws get loose, i believe there are two screws that hold it up,when those are loose you will get a grinding sound when the gears skip. good luck.

Feb 25, 2009 | 1992 Volvo 940

Not finding what you are looking for?
1992 Mitsubishi Pajero Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...