Question about 1998 Dodge Ram

1 Answer

1998 dodge ram 1500 po132 engine light wont go off after replacing h2o sensors

Bank 1 sensor 1

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,602 Answers

The h2o sensor may not be the only problem, some thing else is setting off the sensor, a pin hole in the hose, a loose connection, cracked lines, plug lines, blockage of sensor that controls the h2o unit, look at the whole picture, housing, gasket is that area, too much h2o, not enough h2o, gases mixtures + h20's, make sure you have the air pressures sucking and pushing through the line.
you are going to have to a service manual and general information how the h20 system works in that vehicle. test points.

www.ask.com/year/mfg.name/make/model/how/does/H20/system/works/on/vehicle/

Posted on Sep 18, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I had a P0138 code after a diagnostics test on my 2006 dodge ram 1500 4X4, what does this mean?


P0138 DODGE - O2 sensor 1/2 Circuit highxicon.jpghttp://engine-codes.com/p0138_dodge.htmlForum CodePossible causes- Rear Heated Oxygen Sensor Bank 1 harness is open or shorted
- Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Faulty Rear Heated Oxygen Sensor Bank 1
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks Tech notes Replacing the rear O2 Sensor bank 1 usually takes care of the problem.

Jul 09, 2012 | 2006 Dodge Ram 1500

1 Answer

2005 aveo code po132


There is not cut and dry solution for this code, here are the possibility's
P0132 - O2 Sensor Circuit High Voltage Bank 1 Sensor 1 Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
- High Fuel Consumption
- Excessive Smoke from Exhaust Possible causes - Front Heated Oxygen Sensor Bank 1 harness is open or shorted
- Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Faulty Front Heated Oxygen Sensor Bank 1
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks

Feb 14, 2012 | Chevrolet Aveo Cars & Trucks

1 Answer

Which o2 sensor is the cylinder bank no.1, sensor no. 2 on a 1999 Dodge Ram


Bank 1 is the row of cylinders on the driver side of your truck and sensor #2 is the one after the catalytic converter, closer to the back of the vehicle than the engine

Jun 02, 2011 | 1998 Dodge Ram 1500 4WD

1 Answer

2002 Dodge ram 1500 5.9L oxgen sensor bank 1 sensor 1 where is that sensor


The oxygen sensor is located on the exhaust manifold or directly after that on the exhaust pipe close to the engine.

Sep 17, 2010 | Dodge Ram 1500 Cars & Trucks

1 Answer

Check engine light code P031 for 2002 Dodge Ram 1500, what does it mean?


Dear Madam or Sir,

the code stands for:

Heated Oxigen Sensor1, Bank 1, Heater Control - circuit low.

So the heating of the O2 Sensor is faulty, you should see a mechanic to fix it.

Jun 27, 2010 | 2002 Dodge Ram Maxi

1 Answer

I asked the question..."I have a 2003 dodge ram 1500 4x4 with the 4.7L engine. The check eng light is on. obd2 reads code P 0038 And says HO2S Heater Control Circuit High (Bank 1, Sensor 2). the heater is...


P0038=HO2S Heater Control Circuit High Bank 1 Sensor 2,
The oxygen sensors on your truck have an extra wire to them,they are a heated oxygen sensor,
the computer sees a problem with the heated oxygen sensor on the drivers side,before converter.
not the sensor after converter!

Jan 08, 2010 | 2008 Dodge Ram Pickup 1500

1 Answer

Find location of Bank 1 sensor 1, need to replace


Will be the sensor before the catalytic convertor.

Dec 14, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

How do i locate my oxygen sensor { bank 1 } , on my 1996 dodge 1500 5.2l?


Hello grandmaster811: My name is Roger and I will help you. According to All Data repair service. You will find bank one sensor one located on the right side of the engine. They are numbered from front to rear as bank i sensor one. bank one sensor two and so on.
Please rate the quality of this answer as this is our way of knowing you received the correct answer. Pleas just ask if you need further help. Thank You for using Fix Ya. Roger

Sep 19, 2009 | 1996 Dodge Ram 1500 Club Cab

Not finding what you are looking for?
1998 Dodge Ram Logo

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85160 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...