Question about 2002 Mitsubishi Lancer

Open Question

I've lost my remote for 2002 lancer. When I open door with key, alarm goes,off. How do I stop it and use the car until I can get a replacement remote

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 203 Answers

SOURCE: remote not working how to manually disarm alarm

did you get a different key for your alarm box if not thy the ignition key. joe

Posted on Nov 21, 2008

Ad
alicantecoli
  • 22484 Answers

SOURCE: new battery, can't reset alarm

remove the alarm,their might be a passive switch on the alarm to turn it off with a special key,if you dont have the key break the lock so you can turn it off or try to open case of alarm and look at wires and then dertimine which ones to join or break,every alarm inside is different so you will have to work it out.

Posted on Nov 28, 2008

edwardjwoods
  • 372 Answers

SOURCE: replace my control remote for my ignition started & alarm system

there should be a button some where that you can push while the key is in the on position and it will stop the alarm for that ignition cycle. Then i reccomend taking the alarm out or take it to a reputable electronics shop and they can tell you what manufacture and model is.

Posted on Jul 28, 2009

  • 160 Answers

SOURCE: I have 2002 eclipse spyder

im not positive..but...i know for my old car...if i locked doors as i was getting out with power switch..it set the factory alarm.
if u dont want to set the alarm..close the locks manually.

Posted on Jan 06, 2011

  • 192 Answers

SOURCE: I bought a 2010 lancer my key is a remote with a

This is typically done at the dealership. IF the car is still under warranty, most dealers will do this for free. Otherwise there will be a charge. I'm assuming this is a factory alarm. If not, you must go to the alarm company for help.

I hope this helps,
--Robert

Posted on Oct 28, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i disengage the alarm system in a 2002 dodge stratus?


lock all doors then use key in front passenger door to unlock. that disables the alarm

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_a3369546f8067589

Jan 17, 2018 | 2002 Dodge Stratus

2 Answers

How do I turn off the door alarm on my 2002 Chrysler PT? When I put the key in and unlock the door, the alarm goes off and doesn't stop until I turn the ignition on.


this is a standard warning to tell you the keys are in the ignition to help prevent them from being locked inside. This is a factory alarm and cannot be turned off

Jul 26, 2011 | 2002 Chrysler PT Cruiser

1 Answer

Lost keys and keyless remote


you must go to dealer and have akey made because the one you lost probably has a theft deterant by pass built into key thats why it wont start you have a computer chip in your original key that by passed alalrm and it would start ur car they will need ur vin number

Feb 02, 2010 | 1998 Ford Windstar

1 Answer

2002 VW Golf TDI open door light & alarm


check door switches remove 1 at a time and unplug it once you find the bad switch lights will go out
un plug 1 at a time

Jan 22, 2010 | 2002 Volkswagen GTI

1 Answer

Replace my control remote for my ignition started & alarm system


there should be a button some where that you can push while the key is in the on position and it will stop the alarm for that ignition cycle. Then i reccomend taking the alarm out or take it to a reputable electronics shop and they can tell you what manufacture and model is.

Jul 28, 2009 | Mitsubishi Lancer Cars & Trucks

3 Answers

Program remote control for mazda mpv 2002


Courtesy of: forums.mazdaworld.org

Try this, it works on several 2002 models:


Step 1: Open drivers door and leave open.

Step 2: Lock and unlock the drivers door using the power door lock switch on the door.

Step 3: Insert key into the ignition.

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

Step 5: Open and close the drivers door 3 times. (Door should be left open after this step).

Step 6: ECU should respond by locking and unlocking the doors.

Step 7: Press any button on remote #1. ECU responds by locking and unlocking the car doors.

Step 8: Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done

Dec 06, 2008 | 2000 Mazda MPV

1 Answer

Remote not working how to manually disarm alarm


did you get a different key for your alarm box if not thy the ignition key. joe

Nov 21, 2008 | 2002 Mitsubishi Lancer

Not finding what you are looking for?
2002 Mitsubishi Lancer Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

Marvin
Marvin

Level 3 Expert

85161 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...