Question about 1998 Ford Windstar

1 Answer

I want to take out the chime buzzer or speaker in my 98 ford windstar get rid of it all together but where is it located?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 5,954 Answers

Undr steern colum thers a blacbox w electronics..ucan pullout speakr carefully or cover it w tape to lessen sound

Posted on Jan 16, 2019

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 375 Answers

SOURCE: can a 96 Ford Windstar Air Conditioner Compressor Pump Fit in a 98 Windstar?

The compressor is the same but it may have a different pulley and the plug may be indexed on the wrong side. If you have a set of snap ring pliers you can put your coil and pulley on that compressor or it may already be the same ones just make sure you put the plug where it is on your original compressor.

Posted on May 18, 2008

Anonymous

  • 1010 Answers

SOURCE: 1998 Ford Windstar AC compressor

They get more than warm, but not excessively hot that you can't touch it. This can be caused by a faulty condenser fan motor, dirty condenser coil even low freon, which is my guess along with a dirty condenser. Check these two issues and if it's not the problem your compressor may be getting ready to die. because of internal issues with the motor windings. Make sure the fan is running to speed, clean the condenser and see if the larger copper pipe to the compressor is ice cold and sweaty, if not you may need freon

Posted on Jun 23, 2008

Anonymous

  • 66 Answers

SOURCE: Having problem's with my 98 Ford Windstar

Check  transmission fluid level first. Make note if the fluid color is dark brown and smells burnt you probably have a serious problem. If fluid is full, you probably have pump failure. Trans will need to be overhauled or replaced.

Posted on Jan 04, 2009

michigan man

edgar walker

  • 3533 Answers

SOURCE: I need the location of

up by the throttle body itself

Posted on Jan 25, 2009

localwonder

Michael Masters

  • 6784 Answers

SOURCE: remove fuel pump from tank ford windstar 98

To gain access to the fuel pump, it is necessary to remove the fuel tank.

  1. Depressurize the fuel system and remove the fuel tank from the vehicle.
  2. Remove any dirt that has accumulated around the fuel pump module attaching flange, to prevent it from entering the tank during service.
  3. Turn the fuel pump module locking ring counterclockwise using a locking ring removal tool or a brass drift and remove the locking ring.
  4. Remove the fuel pump module.
  5. Remove the seal gasket and discard it.

To install:
  1. Put a light coating of grease on a new seal ring to hold it in place during assembly. Install it in fuel tank ring groove.
  2. Insert the fuel pump module into the fuel tank, then secure it in place with the locking ring. Tighten the ring until secure.
  3. Install the tank in the vehicle.
  4. Install a minimum of 10 gallons of fuel and check for leaks.
  5. Install a pressure gauge on the throttle body valve and turn the ignition ON for 3 seconds. Turn the key OFF , then repeat the key cycle five to ten times until the pressure gauge shows at least 30 psi.
  6. Check for fuel leaks at the fittings.
  7. Remove the pressure gauge.
  8. Start the engine and check for fuel leaks.

Posted on May 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 windstar keeps dying


Ford Windstar Starting/Stalling Problems - Edmunds.com

forums.edmunds.com > Ford > Ford Windstar

Oct 16, 2007 - 31 posts - ‎26 authors
Then yesterday the car just died while driving and had to be towed back to ... On pre-98 Windstar, it might be called CCRM (Constant Control ... Ford Windstar Alternator and Battery Problems
31 posts
Oct 24, 2006
Ford Windstar Electrical Problems
31 posts
Apr 14, 2006
More results from forums.edmunds.com

my battery on my 98 ford windstar keeps dying? ' Yahoo ...

https://answers.yahoo.com/question/index?qid...
Mar 20, 2007 - while driving the battery will short out and sometimes turn right back on, causing the van to die. 2000 Ford Windstar battery keeps dying after changing alternator ...
Jun 23, 2010
Alternator keeps dying in 1995 ford windstar, already been through ...
Oct 7, 2007
Battery keeps draining in 99 Ford Windstar Van?
Sep 5, 2007
My 1998 Ford Windstar's battery keeps dying, why? Also the ...
Dec 16, 2006
More results from answers.yahoo.com

98 windstar 3.8 problems - CarGurus


Jan 23, 2016 | 1998 Ford Windstar

1 Answer

How does one disconnect the warning buzzer?


Is it a buzzer or chime? There is a chime module under the dash that can be unplugged. Put your ear down low to find it and unplug it

May 10, 2015 | 2002 Ford Mustang

1 Answer

What is the fuse called that controls the key in ignition sound


The sound buzzer usually isn't seperateley fused, and if it was you would disarm the key in no lock function, and lock your keys in a lot probably, If its the chime you want disabled, you can probably leave the key on listen, locate the sound location, unplug the chime device, take it apart and see if you can quiet it.

Aug 13, 2014 | 2003 Ford Explorer Sport Trac

1 Answer

The driver side seat belt buzzer keeps ringing even with the belt buckled


Find and disconnect the seat belt buckle connector. short the two wires together on the harness side with a paper clip. If the chime/buzzer quits, the problem is in the buckle assembly. If the chime/buzzer is still going off, the problem is some where in the wiring or module.

Apr 17, 2011 | 2007 Dodge Dakota Cab SLT

1 Answer

Have no diagram for a 1996 ford windstar.Trying to find fuse for turn signals,and how to turn off door chime.


I HAVE A 1998 WINDSTAR, AND THE FUSE BLOCK IS LOCATED ON THE DRIVER'S SIDE, UNDER DASH!

Feb 26, 2011 | Ford Windstar Cars & Trucks

1 Answer

How do you disconnect the chiming that comes for the key switch


locate your chime buzzer (under the dash) and disconnect it from the harness- although when you do this you wont have any reminders to turn off your lights or what not- only recomended if your chime has gone batty and wont STFU lol

Apr 05, 2010 | 1996 Ford Taurus

Not finding what you are looking for?
1998 Ford Windstar Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...