Question about Peugeot 206

Open Question

What are the timing marks to fit Cam Belt on a 205 Peugeot 206, 1.4 litre, 16 valve?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
alicantecoli
  • 22484 Answers

SOURCE: peugeot fan belt

your fitting it wrong

Posted on Jan 17, 2009

Ad
alicantecoli
  • 22484 Answers

SOURCE: need instructions on how to fit auto adjusting peugeot 206

cant honestly say i have fitted one on this model,but is it full auto or is their an adjuster on the back of the clutch pedal.??? look first.Ford escort one is a bit of a pig but easy when you have the knack same as a golf easy when you know how .Now golf cable comes with two plastic ties that hold auto adjuster together and you dont relaese them till the cable is fitted.Can you describe the set up then i might be able to help some more.American web site so a lot of models not listed here and the lingo take a bit as well ,i mean whos ever heard of pigs tails or fire wires.Well what else can you expect when they are not taught the queens english and dont drink tea, just waste it by throwing it in the sea.

Posted on Mar 05, 2009

  • 1 Answer

SOURCE: peugeot 206 cc fan belt change

hi ive a peugeot 206cc 02 reg, the STOP light keeps flashing ive checked the normal oil and water but alls ok so whats the problem still runs fine and temp stays where it should??? any tips??

Posted on Dec 28, 2009

  • 279 Answers

SOURCE: broken Timing belt on peugeot 106 1100 cc will valves & pistons

i presume its a tu engine!? these are very good engines and have been known to survive a broken cam belt. i would try one on it before replacing any valves mate

if this helps let me know
cheers
big mike

Posted on Mar 13, 2010

Danniboi
  • 1098 Answers

SOURCE: timing belt diagrams for the peugeot 206

Hi
you are better off looking here http://www.honestjohn.co.uk for europen cars, ask o there as I found it to be quite useful for this type of question.

Regards
Dan

Posted on Jul 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 peugeot 206 GTI 180 cambelt changed at 82,000kms water pump now leaking advised to change cambelt at same time as replacing water pump odometer is now at 92,000 kms. What do you think?


when replacing the pump if the timing belt has to be removed , it is not necessary to replace the belt PROVIDING THAT THE FOLLOWING PROCEDURE IS FOLLOWED
before removing the belt mark it with an arrow indication direction of movement replace the belt with the arrow correctly position as before removal
timing belts ( for want of a better description) breakin from running in a set direction
if replaced running in the reverse direction then the "breakin" gets far worse and early belt failure occurs
when the belt was replaced , if the cam seals , crank seals idler and hydraulic adjuster were not replaced then it might be worthwhile to have it done with the water pump as oil on a belt reduces the life to about 1/2

Mar 23, 2017 | Peugeot Cars & Trucks

1 Answer

How to set cam timing on fiat siena elx 2002 model 1600 16 valve


cam and crank should have marks on them . buy a manual and read up on setting the timing .

Jul 09, 2015 | Fiat Cars & Trucks

1 Answer

Where do you lock crankshaft on peugeot 307 1.4 petrol 16 valve to time engine


Might be worthwhile to ask Peugeot. Question on Pug area of forum???

Jun 29, 2014 | 1995 Nissan Pathfinder

1 Answer

206 peugeot timming marks 1.4 16v ET3J4 engine


how do I lock crank and cam shafts to change timing belt

Jul 02, 2013 | 2005 Peugeot 405

1 Answer

Hi, i have a x reg peugeot 206 hdi, the serpentine belt snapped, i have a new 1 but cannot find a diagram on how to fit it. please help.....i need my car!!


Peugeot 206 1.4 HDi - DV4TD (8HZ) 2004 ...

1. The serpentine belt routing diagram - without A/C (Air Conditioning)

tdisline_888.jpg


2. The serpentine belt routing diagram - with A/C (Air Conditioning)

tdisline_889.jpg

Sep 18, 2011 | Peugeot 405 Cars & Trucks

2 Answers

How long should it take to change a timing belt


hi from uk as you do not mention engine litres ? on average it takes approx 2 hours to change belt and tensioner on 1.8=2;0=cv v t 16 valve engines fitted with air con ? simple enough to diy with instructions and timing mark set up b4 you begin dismantle hope this helps ?

Dec 23, 2009 | Hyundai Motor 2003 Elantra

3 Answers

1995 106 d peugeot cranck shaft timming marks on engine


I've uploaded a manual for 106 tud timing belt refitting:
http://www.gigasize.com/get.php?d=y1dnk2hbl8d
may be it can solve your problem

Sep 01, 2009 | 1991 Peugeot 405

1 Answer

Cam belt change on peaugeot 206 sw


I have a pug 206 sw estate, i need a rear axel non abs any help?

Jun 09, 2009 | 2005 Peugeot 405

1 Answer

Peugeot fan belt


your fitting it wrong

Dec 22, 2008 | 2006 Peugeot 405

1 Answer

Timing belt


there is a tool to fit in the flywheel if you carnt get the tool use a 6 or 8mm bolt,if you line up the camshaft first the hole in the flywheel just under the starter motor will line up

Oct 23, 2008 | 2005 Peugeot 405

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85178 Answers

scj103

Level 2 Expert

89 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...