Question about 1993 Isuzu Rodeo
Trans shifts into gear harshly, car feels sluggish off the line,
No 1st, 4th or TCC lockup available, Manual 2nd, 3rd and Reverse are
only available gears, CEL is on: Transmission is either in limp-home
mode or has lost electrical power. If there are lots of error codes in
the PCM, check the under-hood fuse that powers the transmission, and if
it pops again, look for a short in that circuit like an O2 sensor
harness touching exhaust. Otherwise, check PCM codes for a particular
fault in the transmission causing the PCM to put it in limp-home mode.
No 1st or 4th available; trans shifts 2nd to 3rd by itself in D or OD and locks the converter : ShiftA solenoid failed. Easy fix in the pan. Or a wiring problem from PCM to trans.. or PCM.
Car goes into gear but feels very sluggish like the brakes are dragging, but it will roll easily (starts out in 4th gear), you manually shift to 2 to get it moving, once it's moving you put it back in OD and the car shifts 3rd to 4th on its own and locks the converter at the appropriate time: ShiftB solenoid failed: Easy fix in the pan. Or a wiring problem from PCM to trans.. or PCM.
Good luck and keep me posted, there are other things but these things mentioned seam like what you described.
Posted on Nov 19, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Mar 10, 2016 | Dodge Cars & Trucks
Nov 26, 2015 | Cars & Trucks
Aug 22, 2013 | 1991 Buick Park Avenue
Jun 05, 2013 | Cars & Trucks
May 17, 2011 | 1996 Pontiac Grand Prix
Mar 07, 2010 | 2004 Lincoln Aviator
Feb 06, 2010 | Chevrolet K2500 Cars & Trucks
Jan 24, 2010 | 1994 Buick LeSabre
Jun 05, 2009 | 1988 Toyota Camry
566 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: