Question about 1998 Ford Windstar
One of the door/van loading door switches has failed it thinks a door is open so the the interior light stays on and the door open warning will ding the interior light should have a switch to disable it or take out the bulb but you cant stop the dinging until you find the faulty latch switch and fix it
Posted on Feb 10, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
sound like your fluid sensor may be stuck or bad if light stays on try tapping the washer motor on the resevoir if it goes out faulty sensor as for the door ajar light it might have bad connection with sensor saying the door is closed local dealer should be able to troubleshoot sensor
Posted on Aug 23, 2009
spray all door latches with a good penatrating oil spray alot in the laches slam the doors servral times thier is a switch in the latch that gets stuck it is replaceable but is hard to get at
Posted on Dec 31, 2009
This means one of the door ajar sensors is stuck. You need to remove the door trim panel and then the latch and then the sensor. Once out clean and lube it. There is a sensor inside every door.
Posted on Mar 17, 2010
SOURCE: My 95 Ford Windstar has
one of the door ajar switches are sticking. needs to be put on the computer to find out which one. only other way is to go around and unplug the switches until your light shuts off.
Posted on Mar 30, 2011
Tips for a great answer:
Jan 22, 2018 | Jeep Cars & Trucks
May 30, 2014 | 1998 Ford Windstar
Mar 27, 2012 | 1997 Lincoln Town Car
Nov 20, 2017 | Ford Windstar Cars & Trucks
Mar 30, 2011 | Ford Windstar Cars & Trucks
Mar 19, 2010 | 1998 Ford Windstar
Mar 16, 2010 | 1998 Ford Windstar
Aug 23, 2009 | 2003 Ford Expedition
59 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: