Question about 2006 Chrysler Town & Country

1 Answer

Torque for pyutting new rear brakes and rotors on a 2006 Town&Cou

When replacing the rear brakesandrotors on a 2006 Chrysler Town & Country, what it the torque needed

Posted by on

  • Thomas Johnson May 11, 2010

    Hello... I am not sure what torque you need. There are many when replacing the brakes... Post back with specifics and someone should be able to help. Drumbe

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 149 Answers

Caliper mounting bracket bolts 125 ft, Caliper guide pins/bolts 26 ft, Brake hose to caliper 35 ft. Wheel lug nuts 100 ft. Wheel speed sensor 115in lbs*** This is for disc rear brakes Teves system. You do know that the rear disc is a Rotor/Drum. The parking brake shoes ride on the inside.

Posted on Jan 23, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 CHRYSLER TOWN AND COUNTRY HAD A HORRIBLE PULSE IN THE REAR END AND A SMALL PULSE IN THE FRONT


pulsing brake pedals are allmost allways a sign that drum or rotors are not "true" straight smooth in rare cases it can also be an indication that a wheel bearing has a problem as well

Oct 24, 2014 | 2006 Chrysler Town and Country

2 Answers

Chrysler Town & Country Minivan Rear Drum Brakes


I replaced the brake pads on a '94 Chrysler town and country, I had the rotors turned also, I did not use any anti-vibration substance on the shoes. I hear a clicking noise from front brakes.

Apr 16, 2010 | 2005 Chrysler Town & Country

1 Answer

2006 town and country rear brake rotor removal. After several beatings, i cant get the rear rotors off my town and country. They are alittle loose, but am wondering if i have to do something with the...


yes the e brake shoes inside the rotor tend to create a lip that will hang them up just bake them off a bit and you should be able to pull them off fairly easily also check to be sure that the stock assembly line retainer clips have been removed from the front of the rotor they are just thin looking washers that are pushed on to the lug nut studs to hold the rotor in place on the assembly line a pair of side head cutters work well to remove them and discard after removed.
Hope this helps.

Feb 13, 2010 | 2006 Chrysler Town & Country

1 Answer

2006 Town & country makes clicking sound when breaking. Sounds as if coming from passenger side. Checked the front brakes & they're fine. They were repaced with new brakes & rotors 2500 miles...


As Chrysler says You may experience the following when the brake system go into Anti-lock.....The clicking of solenoid valves. When they changed the brakes did they damaged the ABS wheel speed sensor. It is mounted on the front axle on the back side of the brakes. Sensor & harness are one piece & must be replace toghter

Jan 15, 2010 | 2006 Chrysler Town & Country

2 Answers

I have 2006 chrysler town and country 6 cylinder, recently i've replaced the front rotors,brake pads, front inner and outer tierods, plus the rear rotors and brakepads. the main concern right now is the...


The pulsating can be one of 2 problems, they feel very different, unfortunately, I can not feel what you feel, so here goes. One problem could be with your abs system, possibly diagnosed with an OBD II reader, the other could be warped rotors, but not likely since you replaced. Good Luck! I hope you find this to be very helpful!

Dec 23, 2009 | 2006 Chrysler Town & Country

1 Answer

How to replace rear brakes on a 2006 chrysler minivan


take the wheels off the front,,remove the 2 bolts holding the brakes caliper to the caliper mount and pull off the caliper,then remove the old pads by popping them out, and the remove the 2 bolts holding the caliper mounting bracket to the hub and then remove the rotor,,,to either resurface it,,or replace it with a new one,,,the put the rotor back on(new one) install the mounting bracket and pads and press the caliper piston in with a pliers and then put it back onto the mounting bracket and then tighten all bolts,and do the other side,,pump up brakes and youre good to go

Oct 08, 2009 | 2006 Chrysler Town & Country

1 Answer

I need to change front brake pads


You have two bolts to remove the caliper (it will still be attached to the flex hose). then use a C clamp to compress the caliper piston (one side on outside brake pad the other end on the back of the caliper). Inspect other components, replace pads and reinstall. I would highly recommend replacing rotors as well or at least having them turned. Its a pretty easy job if you have done similar jobs in the past.

Sep 04, 2009 | 2006 Chrysler Town & Country

1 Answer

Early wear on front brakes /rotors for 2008 Town and Country


I work for a brake repair shop and trust me you are not alone.Enterprise and alot of other people bought the same van and had the same trouble.I hate to say but it doesnt stop there.About every 14 to 15 thousand miles you have to replace the front pads.As of now they dont have an upgrade,for instance ceramic pads, but I am sure they will very soon

May 01, 2009 | 2008 Chrysler Town & Country

1 Answer

2002 Chrysler Town and Country


Ok, i'm assuming your replacing them, there is an oval rubber stopper on the backside of the rotor, in the backing plate, located near the bottom. it will tighten or loosen the e-brake shoes inside the rotor, loosen them all the way off, then get a big hammer and give them a really good smack, be carefull not to damage the wheel studs, if your reusing them hit on the hat of the rotor, if replacing you can hit right on the rotor face.
Use some antiseize on the hub before installin your new rotors, and don't forget to readjust your
e-brake and reinstall the rubber plug

Oct 30, 2008 | 2002 Chrysler Town & Country

Not finding what you are looking for?
2006 Chrysler Town & Country Logo

539 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...