Question about 1998 Saturn SL
CODE PO452 IS FUEL TANK PRESSURE SENSOR CIRCUIT LOW INPUT CONDITIONS.YOU COULD HAVE A FAULTY FUEL TANK PRESSURE SENSOR.
Posted on Apr 18, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Need unlock codes for car radio
Call the Saturn Dealer, Just ASK them for it, they will give it to you. *TIP- Don't go over there then they will charge for the service!!!
Posted on Dec 16, 2008
For old models, Saturn/GM also used the same material
fiberglass gasket in your model, you almost certainly have a leak from
a crumpled, sucked-in gasket as I suffered (and many others). I would
say going to Saturn dealership to make repairs is probably not good
idea if they are going to put in the same GM intake gasket part. Maybe
possible to specify Felpro gasket with whatever shop you go to if you
don't do the repair yourself. I would not go too long with your car in
that condition as there is localized leaning at your cyl-3, that could
cause a burnt exhaust valve there.
The exhaust is extra hot venting out that cylinder. P0303 is misfire at cyl-3. Mine was P0301 (cyl-1). You may get P0507 once in a while when PCM fails to control the fast idle caused by the leak under certain conditions. Most of the time, it is very slow idle caused by 3 cylinders running. You run smoother in cold idle because the IAC opens up to increase idle and end up lowering the manifold vacuum, so the reduced vacuum causes less leaking at the failing intake manifold gasket.
I'd say try cleaning everything with your ignition before replacement; Idle problems could be caused by engine coolant sensor (ECTS). Are you sure it was changed? Did they put on a new wire connector along with it?
Posted on Dec 29, 2009
Read this site before you go to the trouble of changing the valve guides.
Use castro GTX 10W30 I use it in my Saturn and it does not burn off or leak out till i remove it.
Posted on Mar 07, 2011
Tips for a great answer:
Mar 20, 2015 | Saturn Cars & Trucks
Mar 12, 2017 | 1998 Saturn SL
Jul 05, 2011 | 2002 Saturn Sl
Jul 01, 2011 | 1998 Saturn SL
Sep 29, 2010 | 1998 Saturn SL
Nov 19, 2009 | 1998 Saturn SL
Nov 12, 2009 | 1998 Saturn SL
Jun 28, 2009 | 1997 Saturn SL
861 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: