Question about 2000 GMC Envoy

Open Question

HOW TO CHANGE HEADLIGHT BULB LOW BEAM ON A 2000 GMC ENVOY SLE.

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: 2008 gmc acadia low beam light bulb changing

how do you change the low beam light bulb on the 2008 gmc acadia

Posted on Apr 02, 2009

Ad
bdubsee

Brian Compton

  • 75 Answers

SOURCE: how to change a headlight bulb in a saturn aura?

Access to change the headlamp bulbs is through the wheel well. The recommended method is to remove the front tire and then the plastic inner fender liner. Once removed, you'll have easy (more or less) access to the rear of the headlamp housing.

Posted on Oct 04, 2010

Anonymous

  • 140 Answers

SOURCE: how do you resolve low beam bulb failure?

I CHECKED THIS ISSUE OUT FOR YOU. ALL YOU ARE REQUIRE TO DO IS REPLACE THE LOW BEAM.. GO TO ANY ADVANCED ATUO PARTS STORE AND PICK UP FOR ABOUT$13.. WHEN INSTALLING THE NEW LOW BEAM USE A RAG, OR CLOTH TO HANG ON THE GLASS OF THE NEW BULB..YOU CANT USE YOUR FINGERS TO PUT THE NEW BULB IN, THE OILS OFF OF YOUR FINGER TIP WILL MESS WITH THE LIFE OF THE NEW LOW BEAM... SHOULD BE A VERY SIMPLE TASK.. GOOD LUCK KEITH...

Posted on Mar 12, 2009

Anonymous

  • 113 Answers

SOURCE: 2000 Chevrolet Blazer Changing Low Beam Headlight

the metal ring is the retainer for the bulb. you should be able to get at it from the front area without taking the grill loose. most of those only have 2 little phillips head screws. remove the screws and the bulb will come out. unplug it and the new one goes right back in. installation is the reverse of removal.

Posted on Jul 21, 2009

Kolawole Ayede

  • 327 Answers

SOURCE: 2006 GMC Envoy low beam

Hello, try to start by checking the headlight relay and headlight fuse. You also may want to check to make sure the bulbs aren't blown out. If those parts check out to be fine and in working order, you may need to replace the turn signal assembly in the steering column. This part controls the hi/low beams. This may sound crazy but, when GM wired their older trucks, they wired the headlights to go from the battery, to the hi/low beam switch, then to the headlight switch (to the left of the steering wheel) then out to the light bulbs. You can kind of test to see if this part is good by making a fist and (with your headlights on) gently hitting the plastic cover for your steering column that is right behind your actual steering wheel. This could cause your headlights to flicker on and off.

Thanks

Posted on Aug 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Repraced low beam ,didn't come on m


check the low beam fuse. if wire is connected to headlight properly and bulb is new then its most likely just the fuse.

Oct 27, 2013 | 2007 GMC Acadia SLE

1 Answer

How do i change low beam headlight 2004 gmc safari


You'll probably have to remove something, i.e. Grill, battery, radiator resivior,etc.

Mar 09, 2013 | 2000 GMC Safari

1 Answer

Change 04 envoy bulb


Headlight Replacement (Envoy)

Lift hood, at top of each headlight assembly look for two L-shaped tabs. Pull these tabs straight up, this will release the headlight assembly. Lift assembly forward to gain access to rear of assembly. There two rubber caps, the top one is for access to the low beam and the bottom for the high beam bulbs. Remove the appropriate cap, grasp bulb socket and turn CCW to release. Unplug bulb from socket by releasing catch on side of socket, install new bulb, DO NOT touch bulb glass with fingers. Reverse steps to re-assemble.

Jun 18, 2012 | 2004 GMC Envoy

1 Answer

Need to replace low beam bulbs in 2004 GMC envoy. Help?


Lift hood, at top of each headlight assembly look for two L-shaped tabs. Pull these tabs straight up, this will release the headlight assembly. Lift assembly forward to gain access to rear of assembly. There two rubber caps, the top one is for access to the low beam and the bottom for the high beam bulbs. Remove the appropriate cap, grasp bulb socket and turn CCW to release. Unplug bulb from socket by releasing catch on side of socket, install new bulb, DO NOT touch bulb glass with fingers. Reverse steps to re-assemble.

Aug 26, 2010 | 2004 GMC Envoy

1 Answer

Replacing the low beam headlight on a 2004 gmc envoy


Just above the headlight assembly are two angled tabs, pull these straight up (they may need some effort). These will release the assembly, carefully pull the entire assembly forward. Access to the headlight bulb is behind the two rubber caps, the upper cap is for the low beam. Remove this cap, twist the headlight bulb socket CCW and remove. Disconnect bulb from harness by prying up gently on locking tab on socket, and pull bulb out. Being careful not to touch the new bulb glass surface with your finger, plug it into the socket and install it back into the headlight assembly turning it CW. Reinstall rubber cap, seat headlight assembly on frame, lining up the bottom and top pegs. Once the assembly is fully seated, push the two angled tabs down, locking the assembly in place.

Oct 15, 2009 | 2004 GMC Envoy

1 Answer

How to change the headlight on gmc acadia 2007 (driver's seat)


the low beam bulb?? it's not that hard turn the wheels to gain access to the wheel well and loosen the inner fenderliner (plastic) to gain access to the back of the headlamp assy

Jun 23, 2009 | 2007 GMC Acadia SLE

1 Answer

How to change low beams on gmc 2005 envoy


Open hood, look for two L-shaped tabs on top of the headlight assemblies, pull these straight up. This will release the assembly. lift assembly out as far as wiring harness will allow, look for a circular rubber cap on the rear side of the assembly, the top cap is for the low beam, remove cap and turn bulb socket CCW to release socket. Unplug old bulb and install new, DO NOT touch bulb glass. Re-assemble in reverse order.

Jun 20, 2009 | 2005 GMC Envoy Xl

2 Answers

My low headlight in my envoy 2002 is down i checked the fuse and still no luck


If this low beam is on one headlight only, I would say that the light is burnt out. Both hi and low beams are on the same bulb.The bulb has 2 filiments, one low and one hi. If you get just one light out , it is most likely a bulb. If you get both sides not working at the same time, it could be something else. You have checked the fuses and deemed them to be o/k. Then you should be checking for headlight bulbs.

May 05, 2009 | 2000 GMC Envoy

1 Answer

2008 gmc acadia low beam light bulb changing


how do you change the low beam light bulb on the 2008 gmc acadia

Feb 24, 2009 | 2007 GMC Acadia SLE

Not finding what you are looking for?
2000 GMC Envoy Logo

Related Topics:

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...