Question about 2003 Mitsubishi Lancer

1 Answer

2006 mitsubishi lancer, i put a book under drivers seat and it pulled srs plug apart. I snapped back together but light stayed on. Someone told me directions to reset. I needed battery anyway so I waited till that install. Light still stayed on. Car had 59,985 miles, I called dealer for warranty repair, they gave appoint to bring in. Cost $40 to put scan on it, then they say driver seatbelt pre-tensioner is bad? They will order part! Total $250?? The odometer was just over 60,000. I dont believe the seatbelt is bad. Any suggestions 1st before repair. I did see an ad from a company that repairs them for $69.00 with a 24hr turn around.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 72 Answers

If your happy with the seat belt as it is and its operating fine, they can not force you to buy it from them. Just get the snapped plug replaced,even cheaper from a breaker, then ask for the light to be reset using there diagnostic equipment. All dealers, well most, will try for that extra buck.

Posted on Apr 30, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why would srs light stay on in my mitsubishi lancer 2003 model


A common reason is that the clock spring assembly in the steering wheel has failed. Next reason is the SRS computer has a problem.

Feb 20, 2015 | 2003 Mitsubishi Lancer

1 Answer

SRS light stays on vrx lancer 02 how do I turn it off please!


use a scanner to confirm the cause of light stayed on. Sometimes the reason is under the seat of driver or front passenger as they are moved either forward or backward and one slight reason is the connector under the seat is not well connected -moved- and have not a good contact and light comes on.

Sep 06, 2012 | Cars & Trucks

1 Answer

My SRS light comes on and doesn't go off. I have a Mitsubishi 2004 Lancer. It's a car that shouldn't have engine troubles or any of the such. I know what SRS is but how serious is this to have on and for...


may i suggest 1st you check under each front seat you will find wire with plug connectors these are part of seatbelts pre tensioners if involved in impact try pulling plugs apart then re connect there may be one unplugged or suffering from damp if you have had snow and carpets are damp from foot wear

Feb 14, 2010 | 2004 Mitsubishi Lancer

2 Answers

Endeaver srs light is on after replacing battery how can I reset also the passenger seatbelt light stays on


The light is on because the SRS computer detected excessively low voltage, likely right before your battery failed/was replaced.
To clear the light you will need to take it to a dealer or a repair shop with a Mitsubishi-compatible SRS scantool.

This happens so frequently, I never charge customers for clearing SRS lights that are related to battery changes (code will be IG low voltage A and B).


Oct 03, 2009 | 2006 Mitsubishi Endeavor

1 Answer

Srs idiot light stays on after vehicle start


Check under the drivers and passengers front seat for electrical cables. sometimes the connections can get disturbed by feet or items that have rolled under the seats (specially if you have kids)making a bad connection of the cables
Hope this helps

Feb 09, 2009 | 2002 Land Rover Freelander

1 Answer

What is the meaning of SRS sign\


SRS is the Suplemental Restraint System, if its on it means there is something wrong with either a sensor or an airbag itself.

Please rate this solution.

Jan 16, 2009 | 2006 Mitsubishi Lancer

1 Answer

Transmission filter 2003 Mitsubishi Lancer


tans. filter is right under the engine on the passanger side. but u dont have to replace it.b'cause its made of steel meche.just flush it.rest talk to the expert.

Jul 04, 2008 | 2003 Mitsubishi Lancer

Not finding what you are looking for?
2003 Mitsubishi Lancer Logo

397 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

Marvin
Marvin

Level 3 Expert

85160 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...