Cars & Trucks - Page 8 - Recent Questions, Troubleshooting & Support


Use or borrow a smartphone with the Google Translate App. Use the camera feature to look at the screen and translate from Japanese to English. Look for Settings and then Language.

2012 Honda CR-V | Answered 18 hours ago


The blower motor is the last thing that would fail most of the time.Jump 12 volts to it off the battery with 2 pieces of wire being a DC. motor it will spine in both directions depending on positive and negative hook up . Most of the time its a relay or a connection if the motor works on high its not the relay its the resistor board or the connection to it.

Ford Cars &... | Answered 18 hours ago


It possibly can be a bad or weak strut that is rubbing on the tire.

2005 Pontiac... | Answered 18 hours ago


I don't understand what your trying to do .If you are having problems with rod bearings on this engine scrap it torquing the bearing caps is not going to fix the problem ,

Ford Ranger Cars... | Answered 19 hours ago


I can think of no reason why you should have this trouble.

The drive shaft assembly is generally made up of an outer constant velocity joint, a shaft and an inner plunge type cv joint - your description doesn't make it completely clear what it is you replaced. Replacing the cv shaft suggests you could have replaced the shaft and outer joint, the outer joint or the complete assembly.

There are alternative types of joints that could be used - the Hardy Spicer type for instance, which must be "timed" with it's opposite number at the other end of the shaft in order to eliminate an output speed variation when transmitting torque at an angle, perhaps the problem you are experiencing.

That is the only idea that occurs to me apart from the possibility the abs system might have developed a fault...

2002 Mitsubishi... | Answered 19 hours ago


Passenger side inside cabin outside under kick panel needs to be removed to see it.You need to remove the panel.

Ford Aerostar... | Answered 19 hours ago


Check the Chilton guide for Ford Bantam or contact Ford for support.

Ford Bantam Cars... | Answered 19 hours ago


well if you uphill or downhill and your driveway you going to have to do the push-up or push it down to get the pressure released from the transmission that could be a problem

1996 Dodge... | Answered 20 hours ago


The John Deere website will have this information - and you can get it from the local dealer for a fee.

Cars & Trucks | Answered 20 hours ago


The book you need is the Chilton auto repair guide, available at most public libraries.

Nissan Cars &... | Answered 20 hours ago


Most likely not. The way to find out is to follow the pedal through the firewall to where it goes. I would say they are probably separate. You may be able to find a Chiltons manual that will give you the answer at a local public library.

Mazda Cars &... | Answered 20 hours ago


Mechanical failure - possibly an obstruction of the gear cluster or selector fork for 4th gear. This could also be a maladjusted shifter linkage.

Mazda Cars &... | Answered 20 hours ago


It's the alternator.
Make sure the belt is not slipping.

Honda Cars &... | Answered 20 hours ago

Not finding what you are looking for?
Cars & Trucks Logo

2,131,285 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

83850 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22413 Answers

john h

Level 3 Expert

19466 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...