20 Most Recent 2007 Bajaj Pulsar 150 Questions & Answers


Bajaj usually places the number on a plate that is just under the handle bars an alternate location should be under the seat for some scooters.,

2007 Bajaj... | Answered on Jun 29, 2019


Hi, John before testing any electrical component in the Starting Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Engine Run Switch is "FAULTY" or corroded.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
5. Bank angle sensor needs a reset or is faulty.
6. FOB battery low or dead.
7. Faulty ignition switch.
8. Faulty starter button.
9. Faulty kickstand, clutch, neutral safety switch.
10. Security alarm needs a reset.
11. Starter relay, solenoid, starter motor or circuit wiring faulty.
12. Starter armature or field coils have failed.
13. Main fuse or circuit breaker may be blown or faulty.
14. Faulty ignition relay.
15. The electric starter is working but starter clutch has failed.
16. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.xbhp.com/talkies/help-me/5635-pulsar-150-self-start-problem.html
What To Do If Your Motorcycle Doesn Start
https://www.manualslib.com/manual/1029310/Bajaj-Pulsar-180-Dtsi.html#product-Pulsar%20150%20DTSi
https://www.globalbajaj.com/media/21423/bajaj-pulsar-150-dts-i.pdf
Bajaj Pulsar 150 DTS User Manual

2007 Bajaj... | Answered on Apr 17, 2019


Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
http://88.198.249.35/d/Pulsar-150-Workshop-Manual.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2007 Bajaj... | Answered on Feb 13, 2019


I think its the internal wiring problem. I too faced the same issue and my mechanic told that the wiring has gone (and indeed it was gone) and once i had rewired everything started working fine.

2007 Bajaj... | Answered on Nov 20, 2018


It may be small fault. Check the list of things like
1. Spark plug check
open the spark plug while its connected to the wire and place it touching the engine(do not hold the plug or wire in hand) and kick start if you see the spark then its ok if not then replace it with a new one by checking it in ngkntk.in
2. Ignition coil
some times the fault is in ignition coil
3. carburettor tuning
look in youtube videos
4. magnet
my uncle has a Honda cb unicorn it kind of had the same problem after so many kick starts it used to start. I had checked everything it seem to be fine then I took it to my mechanic. It took some time to figure out that the magnet lock was broken, previous mechanic did that
5. smoke from silencer
piston is damaged, needs engine repair
6. If the problem is still there then take it to your nearest mechanic

2007 Bajaj... | Answered on Nov 10, 2018


I want to change my bajaj pulser 150 bike wiring. Please tell me how much cost of new wiring service

2007 Bajaj... | Answered on Nov 09, 2018


Hi, Dharma and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting/leaking, spark plug cable connections loose check for spark leakage in the dark.
6. Faulty ignition coil or electronic control module.
7. Faulty pulse coil.
8. Faulty CKP, CMP, or BAS sensor.
9. Faulty ignition switch.
10. Faulty run/off switch
11. Tilt sensor needs a reset.
12. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Pulsar No spark on the right plug Team BHP
pulsar 150 starting problem ignition coil replacement
https://www.bcmtouring.com/imp/Pulsar_DTSi_Workshop_Manual.pdf
Shop At Bajaj Pulsar 150 DTSi UG3 Bike Parts And Accessories Online Store...
Bajaj Pulsar 150 DTS User Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2007 Bajaj... | Answered on Jun 25, 2018


Hi, Dharma and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the choke.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. Fuel injectors stuck open.
13. Quick disconnect check ball stuck.
14. Compression below 75 PSI.
15. A stuck-bent-burnt valve.
16. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
17. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
18. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
19. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections are loose or connected to the wrong cylinders.
20. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
21. Faulty neutral, clutch, kickstand safety switch.
22. Faulty fuel pump or fuse or relay.
23. Faulty or corroded run/stop switch.
24. Tilt sensor needs a reset.
25. Security system not disarming alarm needs a reset.
26. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Thread Pulsar 150 start problem
Pulsur 150 Bike not getting started
https://www.bcmtouring.com/imp/Pulsar_DTSi_Workshop_Manual.pdf
Shop At Bajaj Pulsar 150 Classic Bike Parts And Accessories Online Store...
Bajaj Pulsar 150 DTS User Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2007 Bajaj... | Answered on Jun 21, 2018


Hi, Niranjan for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Bajaj, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Thread Pulsar 180 carb rejetting
01 How to CV Carburetor Disassembly Recording Jets and Settings Cleaning...
MikuniPower com Mikuni Carburetor Tuning and Maintaince Manuals
https://www.bcmtouring.com/imp/Pulsar_DTSi_Workshop_Manual.pdf
Shop At Bajaj Pulsar 150 Classic Bike Parts And Accessories Online Store...
Bajaj Pulsar 150 DTS User Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2007 Bajaj... | Answered on May 21, 2018


Hi, Rupesh for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Bajaj, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Motorcycle Starter Switch Repair also works for the horn button on some...
how to fix electric start and power of bajaj motor bike
Bajaj Pulsar 180 DTSi Workshop Manual
Shop At Bajaj Pulsar 150 Classic Bike Parts And Accessories Online Store...
Bajaj Pulsar 150 Maintenance Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e



2007 Bajaj... | Answered on Nov 04, 2017


Hi, Dipjyoti I would love to help you with your engine or chassis noise but I just loaned my brand new pair of listening ears to your local dealer's chief technician so he could take your bike for a test ride and give you his professional opinion and estimate about your noise and repair cost. If you are a little short on "DRACHMA" and a Dealership is not on your list of fun places to visit then perhaps the list below will help soothe your worried mind so you can make an informed decision.
1. Bearings---SCREECH
2. Belts---CHIRP
3. Brake Rotors---BUZZ
4. Chains---RATTLE
5. Clutches---CHATTER
6. Cylinders---PING
7. Fronk Forks---Plunk
8. Gears---WHINE
9. Head Gasket---HISS
10. Hydraulic Lifters---TAP
11. Pistons---SLAP
12. Rear Shocks---SQUEAK
13. Shifting Trans---CLUNK
14. Solid Lifters---TICK
15. Starters---CLICK
16. Connecting Rods Go---KNOCK-KNOCK---who's there, it's me "*****"
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Thread DIY Get rid of that infamous TICK TICK noise
http://www.xbhp.com/talkies/help-me/25683-bajaj-pulsar-150-ug3-tick-tick-sound.html
Bajaj Pulsar 150 DTS User Manual
Shop At Bajaj Pulsar 150 DTSi UG2 Motorcycle Parts And Accessories Online...
Pulsar Workshop and Parts Manual Team BHP

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2007 Bajaj... | Answered on Feb 04, 2017


220 mask price is 2000
headlight- 4000
jal- 700
handle ,tee-1300
and easily fit in pulsar150

2007 Bajaj... | Answered on Jan 03, 2017


Hi, Muth* I recommend a big bore kit for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.xbhp.com/talkies/help-me/13496-pulsar-150-rebore-new-kit-180cc.html
Converting Pulsar 150 to 180
CYLINDER KIT PULSAR180 CC ZADON
Bajaj Pulsar 180 DTSi Workshop Manual
Bajaj Pulsar 150 DTS User Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2007 Bajaj... | Answered on Dec 21, 2016


It my bajaj pork prableam so I what I do...
3_25_2016_12_23_38_am.jpg

2007 Bajaj... | Answered on Mar 25, 2016


Hi, Afrozsah for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
https://www.facebook.com/media/set/?set=a.497832643584730.119398.177568422277822&type=3
https://www.tradebit.com/filesharing.php/search/0/bajaj+pulsar+150

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2007 Bajaj... | Answered on Nov 21, 2015


Hi Abhijitdesai, try using a spray lubricant as per owners manualI am sorry you can't find the first and best tool you ever bought for your Bajaj but despair not for a mere $10 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
https://www.tradebit.com/filesharing.php/search/0/bajaj+pulsar+150

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2007 Bajaj... | Answered on Nov 21, 2015


Hi, Drkartik for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
https://www.tradebit.com/filesharing.php/search/0/bajaj+pulsar+150

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2007 Bajaj... | Answered on Nov 21, 2015


Hi, Mayankjoshi1 and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Security alarm needs a reset.
6. Starter control circuit, relay, or solenoid faulty.
7. Faulty starter button.
8. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue, please visit the websites below. Good luck and have nice a day.
https://www.tradebit.com/filesharing.php/search/0/bajaj+pulsar+150

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2007 Bajaj... | Answered on Nov 21, 2015


Hi, Jehovajire19 and the usual suspects are:
1. Wheels and/or tires worn or damaged.
2. Engine/transmission/vehicle not aligned properly.
3. Primary chain badly worn or links too tight as a result of insufficient lubrication or misalignment.
4. Engine to transmission mounting bolts loose.
5. Upper engine mounting bracket loose.
6. Ignition timing incorrect/poorly tuned engine.
7. Internal engine problem/flywheels shift.
8. Broken frame.
9. Stabilizer links worn or loose.
10. Rubber mounts loose or worn.
11. Rear fork pivot shaft nuts loose.
12. Front engine mounting bolts loose.
For more information about your issue, please visit the websites below. Good luck and have a nice day.
https://www.tradebit.com/filesharing.php/search/0/bajaj+pulsar+150

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2007 Bajaj... | Answered on Nov 21, 2015

Not finding what you are looking for?
2007 Bajaj Pulsar 150 Logo

276 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Bajaj Experts

richard libby

Level 2 Expert

209 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5926 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Are you a Bajaj Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Pulsar 150 Bajaj

  • Pulsar 150 Bajaj

Most Popular Question

cost full new wiring kit bajaj

  • Motorcycles
Loading...