20 Most Recent 2005 Harley Davidson FLHT - FLHTI Electra Glide Standard Questions & Answers


I'd say that you have an intermittant short somewhere. These are very difficult to find. I'd start at the tail light assembly as most of the time, I've found the shorts in that area, from the seat back to the tail light assembly.

Good Luck
Steve

2005 Harley... | Answered on May 09, 2016


Hi, Conrad sorry you can not find the first and best tool you ever bought for your Harley despair not, for a mere $10 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below, and for specific information or questions feel free to contact me at xlch@mail.com. Good luck and have a nice day.
Owner Manuals Harley Davidson USA
http://www.stcharlesharleydavidson.com/OEMpartfinder.htm
Harley Davidson Manuals Mark Workshop
How to get to the fuse panel on Harley Davidson Electra Glide Motorcycle
Instant Tech Relief A must have !!! only $6 a month "CHEAP"

2005 Harley... | Answered on Apr 30, 2016


http://alibaba.com/product/60303114253-801868515/The_alloy_handle_bar_clamp.html
The alloy handle bar clamp.Are U Interested In It?view tne below website.
17693380-c0yag35dl5fenusmaduydv5u-3-0.png

2005 Harley... | Answered on Apr 28, 2016


Hi Bhbarr, I'm sorry you can't find the very first and best tool you ever bought for your Harley Davidson. Despair not, for a mere $6.50 you may be able to download another one from the website below and good luck. Harley Davidson Manuals Mark Workshop

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2005 Harley... | Answered on May 17, 2015


Hi Anonymous, I'm sorry you can't find the very first and best tool you ever bought for your Harley Davidson. Despair not, for a mere $6.50 you may be able to download another one from the website below and good luck. Harley Davidson Manuals Mark Workshop
You need to pull the entire transmission. Have nice day.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2005 Harley... | Answered on May 17, 2015


Hi David, please visit the website below and good luck.
How to Change the Fork Oil on 2012 Harley Davidson Street Glide

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2005 Harley... | Answered on May 15, 2015


Hi Buelmech, I'm sorry you can't find the very first and best tool you ever bought for your Harley Davidson. Despair not, for a mere $6.50 you may be able to download another one from the website below and good luck.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2005 Harley... | Answered on May 15, 2015


Hi Cleaningnazi, please visit the website below and good luck.
How to Change the Front Brake Pads on Harley Davidson

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2005 Harley... | Answered on May 15, 2015


Hi Rb21157, and where?

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2005 Harley... | Answered on May 15, 2015


Hi Wattelez, somewhere around 26 degrees I believe. Good luck

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2005 Harley... | Answered on May 15, 2015


Hi Anonymous, please visit the website below and good luck.
Motorcycle Repair How to Adjust Motorcycle Primary

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2005 Harley... | Answered on May 15, 2015


Hi Anonymous, please visit the website below and good luck.
Identify Trouble Codes and Clear them Harley Davidson Forums

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2005 Harley... | Answered on May 15, 2015


Hi Ebpbp391, seat removal can range from the simple and obvious to the complex and baffling for the novice new Harley Davidson owner. Seems like the more expensive the bike is the harder it is to remove the seat. So let's start with the most expensive. 99% of all Harley seats have a male tounge in the front that slides into a female reciever that is either bolted or welded to the frame just behind the fuel tank. For this reason when ever you are removing a seat you must always slide it backwards 3-5 inches. Next they may may have a bolt on each side usually under a flap on the seat. Then there is the seat strap that is secured on both sides, only one side needs to be removed. A single screw can secure it to the rear fender or it may have a bracket with two studs secured by nuts or knobs to fasten the rear portion of the seat. If you have a pillion pad or passenger seat that snugs up against the front seat there can be a screw securing the two to the rear fender, you have to get your hand in between the two seats and force seperation of seat material to see and gain acess to the screw. Finally there is the rear seat screw in the back that is the caboose of seat fasteners, usually a large chrome bracket, that screws into the rear fender. Care must be exercised in covering this shinny bauble with your hand during the sliding back procedure so as to NOT scratch the tour pak. So when all the hidden and mysterious fasteners have been removed, it's lift up in the rear, slide backwards a few inches and bingo you have mastered the impossible. Good luck.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2005 Harley... | Answered on May 14, 2015


Hi Hively, if you are running inside wiring make sure the wiring harnesses have a good outside tubing cover or heat shrink. Make sure the holes in the bars are champhered to avoid cutting. Be carefull not to pinch any wires when tightning switch housings. Use polyurethane riser bushings and torque handlebar clamp to 20 ft lbs. Good luck

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2005 Harley... | Answered on May 14, 2015


Hi Wayne, please website below and good luck:
How to Bleed the Front and Rear Brake Lines on Harley

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2005 Harley... | Answered on May 12, 2015


Hi Anonymous, please website below and good luck:
2005 Harley Dyna FXDX starter replacement

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2005 Harley... | Answered on May 12, 2015


Hi Anonymous, please website below and good luck:
Motorcycle Repair How to adjust the clutch on 2008 Harley Davidson Road...

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2005 Harley... | Answered on May 12, 2015


Hi Anonymous, I'm sorry you can't find the very first and best tool you ever bought for your Harley Davidson. Despair not, for a mere $6.50 you may be able to download another one from the website below: Harley Davidson Manuals Mark Workshop Good luck

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2005 Harley... | Answered on May 12, 2015


Hi Anonymous, seat removal can range from the simple and obvious to the complex and baffling for the novice new Harley Davidson owner. Seems like the more expensive the bike is the harder it is to remove the seat. So let's start with the most expensive. 99% of all Harley seats have a male tounge in the front that slides into a female reciever that is either bolted or welded to the frame just behind the fuel tank. For this reason when ever you are removing a seat you must always slide it backwards 3-5 inches. Next they may may have a bolt on each side usually under a flap on the seat. A single screw can secure it to the rear fender or it may have a bracket with two studs secured by nuts or knobs to fasten the rear portion of the seat. If you have a pillion pad or passenger seat that snugs up against the front seat there can be a screw securing the two to the rear fender, you have to get your hand in between the two seats and force seperation of seat material to see and gain acess to the screw. Finally there is the rear seat screw in the back that is the caboose of seat fasteners, usually a large chrome bracket, that screws into the rear fender. Care must be exercised in covering this shinny bauble with your hand during the sliding back procedure so as to NOT scratch the tour pak. So when all the hidden and mysterious fasteners have been removed, it's lift up in the rear, slide backwards a few inches and bingo you have mastered the impossible. Good luck.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2005 Harley... | Answered on May 12, 2015

Not finding what you are looking for?
2005 Harley Davidson FLHT - FLHTI Electra Glide Standard Logo

Popular Tags

72 questions posted

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5948 Answers

Mike

Level 3 Expert

4363 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

FLHT - FLHTI Electra Glide Harley Davidson

  • FLHT - FLHTI Electra Glide Harley Davidson

Most Popular Question

2005 electra glide standard

  • Motorcycles
Loading...