Question about Hyosung Motorcycles

1 Answer

Oil change Hyosung Motorcycle

Changing oil & removed 17mm drain plug & spring & plunger fell out @

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Hyosung Master
  • 57,613 Answers

Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Hyosung, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://motofaction.org/motorcycles/hyosung-gt250-gt250r-gt250v-comet-125-250/how-to-change-engine-oil-and-filter-gt250-gv250-comet-gt250r
https://www.youtube.com/watch?v=cCQL_nToHm4
https://www.manualslib.com/brand/hyosung
https://alpha-sports.com/hyosung_parts.htm
http://mybikemanuals.com/hyosung

Posted on Jun 22, 2019

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 53 Answers

SOURCE: hot start lever siezed in plunger of crf 250 x carburettor

have had the same problem many times. spray carb cleaner into hole where the brass plunger is located give it a little time to let the cleaner work. put some force on the cable it may come out if not remove the cable at the other end so you can remove carb to work on it

Posted on Mar 27, 2009

  • 3 Answers

SOURCE: Suzuki GN125 engine oil drain

The spacer goes in first then the spring. What you removed was the detent for the shifter

Posted on Apr 13, 2009

Thermo King
  • 593 Answers

SOURCE: Oil drain plug removal

3/8 inch drive ratchet and 17mm socket.

Posted on Feb 14, 2010

  • 146 Answers

SOURCE: pulled the pin bolt instead of drain plug

Sorry. I'm very certain you can't fix your problem without splitting the case. I would be cautious about running the motor at all. When you removed that bolt those pieces are free to fall down to the bottom of the case to interfere and do damage. Good Luck.

Posted on Feb 23, 2010

nedkelly900
  • 345 Answers

SOURCE: looking for the oil drain plug on my 2006 dyna street bob

you probly drained the primary case oil, which house the primary drive chain and clutch. The main oil is in the oil tank, there should be a drain bolt on the bottom of the tank

Posted on May 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

83 yz 125 was shifting okay. Drained oil, replaced with new clutch oil. Shifts into first, won't shift into other gears at all.


Hi Arron by any chance did you loose a spring and a ball bearing or plunger when you opened the sump plug??? Some bikes have one drain plug some have what looks like a drain plug but with a plunger to hold the selector drum in neutral. Check the container you drained your oil into you might get lucky. Regards Jim...

May 16, 2015 | Motorcycles

1 Answer

2009 Saturn Vue; Any pictures of where the oild drain plug is?


hi Phil, The drain plug will always be at the lowest point on the bottom of the oil sump. can't send you a picture but I'm sure you can find it. you'll probably need to remove the plastic covers underneeath. Regards JohnJohn

Nov 27, 2011 | 2009 Saturn VUE

1 Answer

I need step-by-step directions or changing oil and filter on 2001 Kawasaki 1500 Nomad


1. locate drain plug (bottom of engine) mines a 17mm
2. remove drain plug
3. locate and remove oil filter (rear of engine)
4. after draining reinstall filter (wipe lite film of oil on rubber seal) HAND TIGHTEN ONLY
5. reinstall drain plug
6. fill with oil (usaully around 1 gallon) check your book or just use sight glass

Jul 10, 2011 | kawasaki VN 1500 Vulcan Classic...

1 Answer

How do i change the oil


you need to remove 2 undershield covers. one is metal held on by 4 12mm bolts, the other plastic by 5 12mm bolts. oil filter is front of engine slightly towards drivers side, and drain plug is a 17mm. 4.5qts of 5w30

Feb 19, 2011 | 2003 Kia Sorento

1 Answer

Oil change


VERY SIMPLE,JUST TAKE OUT THE OIL DRAIN PLUG(17MM)WRENCH DRAIN THE OIL,REPLACE THE PLUG,THEN REMOVE OIL FILTER RIGHT ABOVE DRAIN PLUG AND REPLACE,FILL OIL ABOUT 3.75QRTS FOR A HONDA.










TIM.

Dec 03, 2010 | 1994 Honda Accord

1 Answer

How do I get to the oil drain plug on a 2000 Ford E150


Under engine you will locate the OIL pan which is solid metal and you will notice Under OIL pan is a 17MM Bolt
Remove that to drain oil
Oil drain may take up to 45 Mins to fully drain

Jun 22, 2010 | 2003 Ford E150

1 Answer

I can't locate the oil drain plug on a 2007 Hyundai Elantra. Help Anyone??


Place container under oil drain plug under the engine oil pan, remove drain plug using 17mm socket or wrench.

Hope this tip helps.

r/
David

Feb 23, 2010 | 2007 Hyundai Elantra Limited Sedan

2 Answers

Oil drain plug removal


3/8 inch drive ratchet and 17mm socket.

Feb 14, 2010 | 2006 Yamaha Roadliner

1 Answer

Oil change


underneath the engine at the lowest point there is a bolt about 17mm undo drain oil then put 17mm plug in fill the new filter with new oil before screwing back on and place oil around rubber ring on new filter so it seals properly fill with oil to low point on dipstick start car check oil filter for leaks turn car off let oil settle and check level again too much oil in a motor will cause problems so dont over fill hope this helps glenn...........

Dec 15, 2008 | 2006 Suzuki Grand Vitara

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyosung Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5924 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

richard libby

Level 2 Expert

209 Answers

Are you a Hyosung Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...