Question about Power Motorcycles

1 Answer

No power at all blows fuse the minute I turn on the key

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Power Master
  • 58,590 Answers

Hi, Anonymous you have a dead short which is usually the easiest to find. Using a test light connected to the hot side of the blown fuse holder, start probing the wire leaving the fuse holder about an inch away the test light should illuminate, keep probing towards the ignition switch until the test light no longer illuminates you are now very close to the short. Good luck and have a nice day.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Posted on Jan 06, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ignition coil fuse blowing when key turned on


Either a faulty coil or a short somewhere.
should really consult an good auto electrician, might diagnose the issue in minutes.

Jun 16, 2015 | Mini Cars & Trucks

3 Answers

There is no reaction when turning the key to start the car


Turn key to On.
Turn on headlights manually... Do they come on?
Are there any lights on the dash?
If yes to these, battery is possibly not the sole problem.
Check for good, tight and clean connections at battery terminal posts!
If yes to above, continue on & get a helper... Turn key past on, to Start position.
Do you hear a click sound at time key is turned to Start?
If yes, then ignition switch is not problem, starter relay is getting power, and is now sending power to starter, but starter is not working.
Pic any No's... Then look there.
Good luck.

Mar 29, 2015 | 2005 Ford Focus 1.6

1 Answer

My roady keeps blowing the headlight fuse. But it only does it after the bike is running for about 3 to 5 minutes. after it has been running all I have to do is turn the key on and the fuse blows. But...


check wiring from fuse to handle bar switch then to headlite for loose connections and or worn wire touching medal

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Mar 16, 2015 | Goes Motorcycles

1 Answer

30 amp Starter/Ignition fuse keeps blowing when i turn the ignition key. The instrumentpanel lights are dim and then the fuse blows.


I am assuming you are talking about the circuit that powers the key switch. I'm showing a fuseable link to the starter relay instead of a fuse.
If it is the circuit that powers the switch, I would disconnect the switch and see if the fuse blows as each circuit is powered one at a time using a jumper wire. You can get 30amp circuit breakers that plug into the fuse slot to use while you are testing circuits.
You may need a repair book or shop manual to find out what is powered by that fuse since it is most everything on the car.

Mar 01, 2013 | 1997 Dodge Avenger

1 Answer

My 2004 silverado crewcab battery went dead and was replaced. The Air conditioning system now only blows through the defrost vents and the dial to change the airflow does not work. Can this be reset?


Turn the key on and make sure the blower motor is working. It doesn't matter what speed. Turn the key off. Pull the hvac1 fuse out of the under hood fuse box. Wait five minutes. Reinstall the fuse. Turn the key on, do not start the engine or touch the heater controls. You should hear the heat swiping through the different modes. After a couple of minutes it should stop. Turn the key off then start the vehicle. It may take several tries but eventually it should recalibrate.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Sep 17, 2011 | 2004 Chevrolet Silverado 1500 Crew Cab

1 Answer

We have a 2000 Solara that we just replaced the battery in, or rather, we tried, and the horn is now staying on continuously. It keeps blowing a 100 amp fuse, and does not have a key fob type alarm. The...


Why was the battery replaced? Theres no reason the the 100 amp fuse to blow unless the alternator is shorted or you hooked up the battery backwards. I think the 100 amp fuse goes to the alternator. If it was hooked up backwards then you may have engine computer damage.

Aug 25, 2011 | 2000 Toyota Camry Solara

1 Answer

Keeps blowing starter fuse when you turn the key to start engine.


YOU GOT A IGNITION WIRE TO STARTER SHORTING TO GROUND.

May 06, 2010 | 2000 Toyota Camry Solara

2 Answers

I have a 1998 chevy blazer (s-10) 4.3L 4x4 it keeps blowing the #15 (10amp) 4wd fuse, if you put a 10 amp fuse in it will blow the minute you turn it on ,then we put a 15 amp in it seems to do it when you...


check transfer case electrical switch, sometime if it bad it will also blow the fuse. don't recommend you put any higher fuse than recommend, If the fuse blow there is a short some where and by putting higher amp fuse you might short or burn something else beside the fuse. if that check out than check your transfer case motor, might lock up and not allowing the motor to turn instead it short the fuse. don't drive the car, just leave it in park, put correct fuse amp back in and unplug transfer case electric switch and turn the key on (dont start the car) and see if the fuse blow; if not plug it back in and see if it blow the fuse. if that is not the case, unplug transfer case wire, and do the same and see if it blow the fuse.

Jul 12, 2009 | Chevrolet Blazer Cars & Trucks

1 Answer

Car starts then dies


Your antitheft system is shutting it down. You need to reprogram it. First hook up a battery charger. Then turn the key on. The security light should blink on and off. Leave the key on for 10 minutes. At the end of ten minutes, the security light will stop blinking. When it does turn the key off for five seconds. Then turn the key on. Repeat the 10minutes. Turn the key off then on. Repeat the 10 minutes a third time. At the end of the 3rd ten minute period , start the truck. It should be reprogrammed and continue to run.

Mar 10, 2009 | 2002 Chevrolet Silverado

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Power Experts

D. E. Hev

Level 3 Expert

1187 Answers

gbob59

Level 3 Expert

3042 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Power Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...