Question about 2011 Ultra Ground Pounder ST

1 Answer

Replace the rear drive belt 1999 Ultra Ground Pounder ST

HOW DO I CHANGE REAR DRIVE BELT ON MY HARD TAIL ULTRA GROUND POUNDER I CANT GET THE PRIMARY GEARS OFF TO GET INNER PRIMARY HOUSING OFF TO ACCESS THE DRIVE GEAR IS THAT A NUT IN MIDDLE OR PRESS SLEEVE I REMOVED CLUTCH COVER AND UNSCREWED SHAFT NUT N TAPPED ON SHAFT THOUGHT MAYBE BUT IM LOST ITS A 99 ULTRA GROUND POUNDER RIGID FRAME WITH 113 SS AND 5SPD TRANNY ANY1 CAN HELP ID REALLY APPRECIATE IT THANX LUGNUT @

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Ultra Master
  • 58,568 Answers

Hi, Lugnuttsplac for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Ultra, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
How To Remove Replace Final Belt Drive on Harley Davidson Motorcycle Biker...
99 to 05 Harley Softail Service Manual pdf
https://www.sscycle.com/
https://ownersmanuals2.com/harley-davidson/softail-deuce-2005-owners-manual-66406
Instant Repair Help over the Phone To speak to me personally $6

Posted on Jun 01, 2019

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 75 Answers

SOURCE: Seagate ultra u320 scsi drive

SCSI is a class of knowledge on its own - drive numbering etc etc - Have you set up the drive cable with the termination block at the end ??.
There are plenty of recovery programs around ( if you have a failing drive or deleted filed etc) but first you have to get the drive 'recognised' by the system.

Try also to Google on "SCSI setup" solutions and try www.youtube.com also. There maybe a video on how to set the drive up, there.

Posted on Feb 02, 2009

Luisjhernand
  • 84 Answers

SOURCE: How do I power a SATA DVD drive?

There are actually adapters for SATA powered devices as long as you have the required SATA data cable connection to your motherboard.
Click here to see an example of this item from ebay.
All you would have to do is plug in the adapter into any free connection on your existing power supply and then plug in the SATA data cable both into your drive and the motherboard. There are actually SATA data cable adapters if you don't have that either, but i'll just stick to answering your question! (:

ASpecialty4You.com

Posted on Dec 21, 2009

Testimonial: "Thank You, the manual for the PS doesn't explain this. Tom"

  • 3247 Answers

SOURCE: I have an ultra mini

CAn you please confirm if you are using this device (click link)
What is the Windows operating system and the interface you are using?
What type of hard disk is installed in it?

Posted on Oct 08, 2010

  • 137 Answers

SOURCE: Unable to access my folders and files from WG passport ultra external drive. How to fix it?

The following steps may help you:
Start>type control folders>under view tab> tick on "Show hidden files, folders or drives" and at the same time remove tick from "Hide protected operating system files"

Posted on Mar 27, 2015

bremag885
  • 41 Answers

SOURCE: WD External Hard Drive Passport Ultra Beginner's Questions

Usually with an external hard drive it's not necessary for it to copy over an existing backup or at least you can program your PC not to do this. What will happen is you will have several different copies of backup's and you will have to decide if you want to erase the others and keep the most resent one. Yes your file will be saved withing the backup but if you change the file name it will file this as a new file

Posted on Sep 28, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2014 Harley Davidson Trike Tri Glide Ultra adjust the rear drive belt


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere $38 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
Thread Drive Belt Tension
Harley Davidson service manual Mark workshop $9 cheap
https://www.motorcycle-manual-download.com/index.php?main_page=product_free_shipping_info&products_id=375 $29
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
2014 Harley Davidson Electra Glide Ultra Classic Owner Manual
2014 Harley Davidson Tri Glide Ultra Owner Manual
Instant Tech Relief To speak to me personally absolutely "FREE"

Feb 25, 2015 | 2014 Harley Davidson Trike Tri Glide Ultra

1 Answer

How do i replace drive belts


you have to unbolt axle to get enough room to put belt on and it will be hard to get belt on best way get rear wills off ground and slip belt on one side of pulley the roll the belt on by rotating rear wheel that are off the ground both wheels have to be off the ground

Aug 08, 2014 | Mtd Garden

2 Answers

Drive belt installation 2000 electreaglid classic


Remove the rear wheel and then remove the primary chain, the clutch, the engine compensating sprocket, and the chain adjuster as an assembly and then remove the primary chaincase housing. Support the bike under the rear fork and engine and then remove the pivot shaft and the spacer THEN slip the belt off the transmission sprocket and then install a new drive belt over the transmission sprocket and proceed to reinstall the pivot shaft and spacer after which you can remove the support holding the engine and rear fork and install the primary chaincase housing, the primary chain assembly and the primary chaincase cover and fill the primary chaincase with lubricant up to the bottom of the clutch diaphragm spring. Install the rear wheel and adjust the belt to the proper deflection dimension and confirm that the rear wheel is properly aligned side to side.

Jul 08, 2014 | 2005 Harley Davidson FLHTCUI Electra Glide...

1 Answer

2000 ultra fat pounder no ignition lights


What lights, speedo illumination and engine light or headlights, running lights etc??? have you checked fuses???

May 04, 2014 | 2000 Harley Davidson FLHTCUI Electra Glide...

1 Answer

Replace drive belt on a flhtk


Hi Anonymous, this is not something you want to try at home on your garage floor. But here is the short version: remove saddle bags, rear wheel, rear shocks, swing arm, outer primary, primary drive, starter, inner primary. Then there the special tools, vehicle alignment, gaskets and seals, ect. ect. ect. Your better off having a professional technician do it. Good luck

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Apr 22, 2014 | 2011 Harley Davidson FLHTK Electra Glide...

1 Answer

HOW DO I ADJUST MY REAR BELT TENSION ON MY 2003 HARLEY ELECTRA GLIDE


Hi Anonymous, for more information about your question please visit the website below. Good luck and have nice day.
Motorcycle Repair Inspecting Adjusting the Final Drive Belt on 2008 Harley...

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Oct 01, 2012 | 2003 Harley Davidson FLHTCUI Electra Glide...

1 Answer

2010 electra glide ultra classic, squeaking noise from primary side only when riding. Could clutch or, belt be the problem. Clutch engages smoothly with no acceleration problems. Especially noticeable on...


You need to determine whether the squeaking is being made by the engine, the primary, the drive, or the frame. While riding, pull in the clutch, does the squeaking stop or change in any manner? Is the noise there when the engine is running but standing still? Pull the clutch lever in and release, does the squeak change or stop.

If I had to say what I think it is, I'd say it's probably the rear drive belt is not tracking correctly due to the alignment of the rear wheel. Look at the rear wheel adjusters. They should be exactly the same on either side of the swingarm. Also, the belt must be tight. If not, a loose belt will make a squeaking noise.

Good Luck
Steve

Dec 26, 2010 | Harley Davidson FLHTCUI Electra Glide...

1 Answer

Cut in final drive belt on 2007 flhtcu how do you remove it & replace


This is a major job. This is the bad thing about a belt type final drive. You must remove the entire primay, outer primary cover, clutch and primary chain, starter, and inner primary. You must also remove the rear wheel and the swing arm to replace the belt. That's why the job is so expensive plus the belt itself ain't cheap. If I can help you further, let me know.

Good Luck
Steve

May 27, 2010 | 2000 Harley Davidson FLHTCUI Electra Glide...

1 Answer

2005 harley drive belt replace.


pretty involved job...do you have a lift? nned to remove bags, raise bike..remove rear wheel...you will also need to remove the outer primary cover, primary chain, clutch assy, and inner primary cover, and disconnect wing arm...once belt is in place over the front drive pulley, you begin re-assembly...if you have never dont it, i would reccommend buying a service manual, or finding a friend that has...its not really hard, but it isnt a job that you should tackle without some experience

Apr 17, 2009 | 2005 Harley Davidson FLHTCUI Electra Glide...

Not finding what you are looking for?
2011 Ultra Ground Pounder ST Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ultra Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Lawrence Oravetz

Level 3 Expert

10543 Answers

Brad Brown

Level 3 Expert

18108 Answers

Are you an Ultra Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...