...find a place that sells the Bearing Assembly for part number 61445-1,which is a roller brush for a GE Wal Mart vacuum. I tightened the phillips sdjustment screw near the belts and it fixed the ...
brush end bearings for debris build-up and sticking bearings--remove the brush assembly, and pull off the bearing blocks. Clean the pin ends on the brush and the interiors of the bearing blocks with Q
vacuum cleaner brush is not spinning, the brushroll bearing might be jammed. Try removing the brushroll assembly and cleaning all hair, string, lint, etc. from the brushroll bearing. If that doesn'
Question about GE Vacuums
...vacuum parts, you could go there. From the manual that came with it, the bearings are non-serviceable, and the whole brush roller needs to be replaced... Originally part 61445-1 was $15.89 + $5.50 ...
...vacuum and check the brush assembly for being stuck. Remove the belt from the motor and try to start the machine--does the motor spin and have vacuum? This machine is not a wet-pickup type vacuum. If ...
...found for my vacuum cleaner when the entire brush assembly in $39.99. This is a very tricky way to get unsuspecting people sucked into paying for something they thought was free. Bad business,
...bearings in the brush roll can be replaced if. It has the metal brush roll. Remove the cotter pin to remove end caps and remove the shaft. Remove the plastic bearing holder on the belt end or the ...
vacuum headand now the brush won't spin. Just in case you're wondering , yes, I removed the sock...HELP Dear Xana,I have had problems like yours before. More times then not the roller brush "belt" got
...vacuum makes a lot of noise? require some greasing/oil in bearings Usually noise comes from bearings either in the brush roll or motor. There could also be something stuck in the intake that is being ...
73 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: