Icom IC-R8500 Base Scanner "flashing display" Questions

Ad

Question about Radio Communications

1 Answer

display will show "Ch_" with the _ (underscore) flashing 4. Enter the number of the channel where you want to store the frequency. Note: channels 1 thru 9 must have a zero before them, example 01, 02,

Ad

Question about Radio Shack Radio Communications

1 Answer

Stops on a bank when no signal is present During a scan of the active banks, the scanner stops on a specific bank, the display indicates "scanning up" and the bar flashes on that bank and will not ...

Ad

Question about Icom Radio Communications

1 Answer

...Display is flashing continuously--no receive Reset CPUChecked all internal inter board cables First check the tape cables from Conv Unit and Rf unit to main unit. Second find if the PLL ICs lock ...

Question about Radio Shack Radio Communications

1 Answer

...display shows "wired" and not "luired." This mode, along with the code, is supposed to clear when the computer programming cable is disconnected. If you don't have a cable connected, your only option ...

Question about Radio Shack Radio Communications

1 Answer

...display for about 5 seconds as the scanner clears and resets itself. - Do not power the unit OFF until the CLEAR message stops flashing NOTE: This procedure will clear (erase) all data that you have ...

uniden 796d was trying to program trunk line pushed mutltablr buttons now wont turn on tried reversing steps pushed program 2 9 select honestly don't remember scanner went dark no display power turns ...

Question about Icom Radio Communications

1 Answer

I have been using the IC-R5 for a few years now with no problems except when using it during the summer. If the weather is hot, after being switched on for a period of time the scanner just starts to ...

I need to reprogram my Realistic Pro-2023 police scanner. I do not have my local police codes nor do I know how to reprogram it. Help. PROGRAMMING YOUR SCANNER For a a comprehensive database of active

Question about Uniden Radio Communications

1 Answer

PROGRAM FREQ IN BC142XL Its so easy to use you really don't need a manual for the Uniden BC 142XL scanner. Turn it on. Push the MANUAL button to stop it from scanning. Push number 1, then push MANUAL ...

Question about Icom Radio Communications

1 Answer

Can you recomend PC software for ICOM IC-R5 scanner I have owned an IC-R5 scanner for 2 years and as I use it mainly at air displays. I have to keep referring continually to the manual to see how to ...

Not finding what you are looking for?
Icom IC-R8500 Base Scanner Logo

12 questions posted

Ask a Question

Usually answered in minutes!

Top Icom Radio Communications Experts

Perry Mellott
Perry Mellott

Level 2 Expert

147 Answers

Robert McClure

Level 2 Expert

161 Answers

Vincent G
Vincent G

Level 3 Expert

2361 Answers

Are you an Icom Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...