2002 Mitsubishi Lancer "heater hose diagram 4" Questions


...hose was clogged so I had that taken care of, a few days later however the blower fan stops working on 1, 2 or 3. It'll work on 4 but it makes a bad grinding noise. I asked a few garage's about this ...


heater hose diagrams for 1992 chevy 20 mark 3 conversion van Followed hoses 4 go to back of van 1 to back of motor 2 to a/c 1 to radiator which one is the inlet hose to put in a flushing kit. Is the ...


4 runner rear heater hose Google heater the rear heater hose and select images. If you mean the main tube that runs the whole length of the vehicle, just keep it close to the frame and secured tightly

heater hoses as well as your top radiater hose just to make sure that the thermostate is not bad.You can look on napaonline.com and search "heater"to get a look at the door motor.You can remove it and

...from dash and make sure cable is connected and do the same under the hood where one heater hose has a valve connected to it, my car heater in the level 1 and 2 does not work but 3 and 4 are

...HEATER HOSE AND USE A WATER HOSE TO RUN THROUGH IT TO SEE IF ANY DEBRIS ARE TRAPPED BLOCKING WATER FLOW This is how I flush the heater core...go to the garden department at Wal-Mart and get a 5/8 - ...

...heater core. Test the water flow valve too. It can be plugged with rust or not moving to let water into the core. The core itself can be plugged too. If you really need a hose diagram, a Chilton's ...

Question about Pontiac Cars & Trucks

1 Answer

...hose behind the distributor cap on my 305L V-8 that is corroded ( like a nipple). I need to replace that part but don't know what it's called... Well the radiator hoses are about 1 3/4 inch wide, the ...

...to two spots and water is flowing out of both when hose is detached...how does that work? sounds like you removed your heater core hoses. Put them back on. Need 1989 nissan engine disasemble ...

Question about Mitsubishi Lancer

1 Answer

...is running. They come from the engine and connect to the heater core at the firewall The hose is about 3/4 inch in diameter and is hot to the touch after the engine is up to operating

Not finding what you are looking for?
2002 Mitsubishi Lancer Logo

1,446 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mitsubishi Experts


Level 3 Expert

85160 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides