Sharp MX-2700N Color Copier "paper sensor" Questions

Ad

Question about Canon Office Equipment & Supplies

1 Answer

Sensor/Wound Paper Jam at Fixing Assembly) 0011-0712 iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i Paper Leading Edge Jam at First Delivery Sensor The first delivery sensor cannot detect presence of

Ad

Question about Office Equipment & Supplies

1 Answer

...paper sensor. I search paper sensor. I don't know paper sensor. I search paper sensor. I didn't see paper sensor small black plastic near paper feed unit or sometimes back of fixing unit and ...

Ad

Question about Office Equipment & Supplies

1 Answer

...paper sensor; set paper properly and press Stop/Reset button Paper sensor broken; replace paper sensor Drive assy broken; replace drive assyBut before it all please check if any broken paper or ...

Question about Sharp Office Equipment & Supplies

1 Answer

...sensor 1. paper sensor It is called paper sensor its installed paper tray 2.Drawer sensor 3. Drive sensor its installed middle position 4. Exit sensor it is in fuser unite. May be any sensor displace ...

Question about Sharp Office Equipment & Supplies

2 Answers

...SENSOR B = PAPER LOOP SENSOR C = N/A D = FUSER PAPER SENSOR E = DELIVERY-TRAY PAPER-FULL SENSOR F = FUSER PRESSURE-RELEASE SENSOR G = MEDIA SENSOR H = N/A I = MP TRAY SENSOR J = CASSETTE SENSOR K = ...

Question about Dell Office Equipment & Supplies

1 Answer

paper input sensor near input roller 2)margin sensor between input roller and cartridge unit 3)transfer bell sensor between cartridge and fuser unit 4)fusing sensor before fusing 5)out put tray sensor

Question about Tally Office Equipment & Supplies

1 Answer

...Paper Sensor needs to be calibrated for the type of paper being used in the printer. The Paper Sensor on the T6218 is an optical sensor that reflects light off the back of the paper, different ...

Question about Sharp Office Equipment & Supplies

2 Answers

...paper sensor. can be one of the following locations. ? TRAY 2 Remove the tray, and then check the paper path for obstructions. Perform a manual sensor test and observe the prefeed sensor (PS102) ...

Question about Xerox Office Equipment & Supplies

1 Answer

Paper Sensor (the black plastic switch that hangs down). Make sure the Paper Sensor is not pressed in. It should move up and down freely. If the Paper Sensor is stuck in the up position, try to gently

Question about Office Equipment & Supplies

1 Answer

...see any obstructions. The paper detect sensor could have dirt in it. Blow canned air directly on the sensor and try again. Asides from the sensor being bad the actuator for the sensor could be

Not finding what you are looking for?
Sharp MX-2700N Color Copier Logo

226 questions posted

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers

k24674

Level 3 Expert

8081 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...