20 Most Recent HP 5070-2583 & 5070-2584 Remote Control IR Receiver IR Blaser Cable Kit - Page 7 Questions & Answers


See http://www.fixya.com/support/t6886053-took_m_raf95_mouse.

You just need to ensure the springs and wheel are housed correctly.

HP Televison &... | Answered on Oct 18, 2011


It looks as if you have to return it personally, and have them fix it. I saw nothing on the HP ID5220 DLP TV in the ballast lists. Sorry, man. Wish I could be of more help. Maybe someone else has a better site, or connections, that can help you. Your best bet is to get professional help with someone, like the company that manufactures the hardware.

HP Televison &... | Answered on Oct 09, 2011


its better to reformat you computer, did you try system restore? try to open your windows in safe mode by pressing F5 when windows is starting then backup your files and reinstall your windows.

HP Televison &... | Answered on Sep 03, 2011


Hi, thanks for using fixya..

The Optical Block probably needs to be replaced. This is a major tear down job and a very expensive
repair. Call HP center and see if they are willing to help with the cost of the repair and also to get a local Service out to confirm that it is a Optical Block problem.

I hope this helps,

HP Televison &... | Answered on Aug 17, 2011


Probably not a circuit board problem but rather an overheated display. Perhaps the TV is mounted ttoo close to the wall or has just worn out. Not usually a repairable problem.

HP Televison &... | Answered on Aug 17, 2011


The answer is "PREKISS". Hope this helps.
Good Luck.
Thanks for using FixYa.

HP Televison &... | Answered on Jul 08, 2011


Try unplugging it for 1 hour. If that doesn't work you may have to replace the power supply. Good luck.

HP Televison &... | Answered on Jun 29, 2011


Hello
It cannot be predicted whether it can be set it right or not; because lightning will have trillions of volts when it hit earth. Our devices are designed to work for 220VAC the most. The repair circumstances will depend on the how strong it was hit by lightning. A through check is necessary to say whether it is repairable or not. Please contact an experienced service techinican and get his advice. OK.

HP Televison &... | Answered on Jun 28, 2011


Yes. If you are not performing the repairs yourself it is time to take it to the repair shop before the main board and power supply both need to be replaced. It might be too late and both of them may already need replacing. That is a costly repair and you might just want to purchase another tv, but let the repair service provider test the board and power supply and he'll let you know. That way you'll have peace of mind and know exactly what is going on.

HP Televison &... | Answered on Jun 01, 2011


Try a different cd if the player won't read any CD or DVD then there is most likely a problem with the actual reading hardware. If under warranty HP should replace, if not can take to a repair shop or purchase a replacement unit. Another thing to try would be looking for a reset to default options in one of the configuration menus to make sure there isn't some software setting that is causing the issue.

HP Televison &... | Answered on May 11, 2011


Your signal board is showing signs of old age. The signal board is the one with all the RCA, and RF connections. You will need to replace this board. If you know of an electronic enthusiast, have them pull out the existing board. They will have to check and replace capacitors as needed. Much of the problems facing flat screen TVs are bad capacitors. Thanks for asking and show all hands of support!

HP Televison &... | Answered on May 10, 2011


It is possible that the computers operating system has become corrupt for one reason or another, my guess is that your computer is over 3+ years old(dv6 series is old) if formatting and reloading your operating system doesn't fix this issue, it may be your hard drive that has failed(or failing)

HP Televison &... | Answered on May 06, 2011


One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect/ boot up a computer hard drive

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your ((motherboard to your hard drive)) make sure they have a secure connection and are not faulty or just replace them there probably old and faulty
make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electrical extensions or just replace them they could be faulty a computer needs its connections to continue its cycle and to have an end so any faulty leads will end up with a computer error
also
click start control panel administrive tools computer management device manager scoll to ports(com&lpt)right click to scan for hardware changes or scroll to monitors + to expand plug and play monitor right click where you have options to update driver,disable.uninstall,scan for hardware changes or select properties where in the general you have the option to troubleshoot also in the driver tab you have the similar options when you first right click on monitor
also
click start control panel,display,desktop you can select a different desktop from the drop down list also settings you can change the settings for more or less pixels or from the drop down list pick the appropriate level of color range or troubleshoot also select advanced then general dpi normal size,larger size or custom settings
always click APPLY after making any changes
hope this helps

HP Televison &... | Answered on Apr 21, 2011


this is the your work let the follow of instruction ..


Front USB connectors removal
  1. Review the safety considerations before performing the steps listed below by clicking on the following link: Click here to view the precautions . CAUTION: Failure to comply with the precautions could result in damage to your product or loss of data.
  2. Power down the server.
  3. Remove the bezel.
  4. Remove the access panel. Click here for instructions on how to remove the access panel .
  5. Disconnect the front USB cable from the system board and unroute it.
  6. Remove the two Torx T-15 screws that secure the Front USB connectors to the chassis.
  7. Remove the Front USB connectors from the chassis and thread the cable out of the opening in the chassis.
Front USB connectors replacement
  1. Thread the front USB cable through the opening in the chassis and insert the Front USB connectors to the chassis, ensuring that the key aligns with the slot.
  2. Replace the two Torx T-15 screws that secure the Front USB connectors to the chassis.
  3. Route the front USB cable to the system board and reconnect it to the system board.
  4. Replace the access panel. Click here for instructions on how to replace the access panel .
  5. Replace the bezel.

HP Televison &... | Answered on Apr 17, 2011


There's a good chance you have failing electrolytic capacitors either in the power section or the inverter section or both.
Any caps in these sections that look bulged at the top, or bulged/leaking at the bottom need to be replaced.
If you repeatedly turn it on, eventually the screen may come on, but every time you turn it off, the TV will get harder and harder to start up until one day it just won't.
Sometimes you have to do the opposite to start it up and unplug it for 5 mins, then try.

If you aren't tech savvy, don't worry, read the rest of this solution and watch the videos.

If you are handy with a soldering iron and can identify the power supply and inverter / FM section for the backlights, an inexpensive handful of capacitors will likely fix you right up.
Match the capacitance on the capacitors. Go over voltage if you can, and still have them fit.
IE - it's not a bad idea to replace a 10V cap with a 16V or 25V or even a 50V, but don't replace a 680uF cap with a 500uF or a 1000uF (unless you are positive it's only doing ripple filtering, and even then, you should go OVER, not under the uF rating).

Most of the caps that go are 10V 1000uF or 3300uF.

I found some great videos of the procedure (for many Samsungs with the same issue) on youtube.

http://www.youtube.com/watch?v=Mm51C_RDIZE
http://www.youtube.com/watch?v=BNHHrgX_6cs&feature=related
http://www.youtube.com/watch?v=8l0AUj8QUkg&NR=1&feature=fvwp
http://www.youtube.com/watch?v=Y7b_nTaZYcU&feature=related

As you can see, this issue spans plasma TVs, as well as large and small LCD TVs and monitors.
The parts are cheap, and skill required is minimal.

HP Televison &... | Answered on Apr 09, 2011

Not finding what you are looking for?
HP 5070-2583 & 5070-2584 Remote Control IR Receiver IR Blaser Cable Kit Logo

0 questions posted

Ask a Question

Usually answered in minutes!

Top HP Televison & Video Experts

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Edward Easley
Edward Easley

Level 2 Expert

97 Answers

Are you a HP Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HP Televison & Video

  • HP Televison & Video

Most Popular Question

greetings am technophobe trying connect

  • Televison & Video
Loading...