KitchenAid KFP670 Ultra Power Food Processor - Answered Questions & Fixed issues


Here is a link to the User Manual on KitchenAid's website: http://shared.whirlpoolcorp.com/assets/pdfs/literature/Use%20and%20Care%20Guide%20-%209705148.pdf
Your model number is a kfp670 ob, the last letters stand for onyx black.

If you ever need any replacement parts, remember us here at the Mending shed. We are one of KitchenAid's largest service centers in the US, and everything we carry is genuine KitchenAid replacement parts.
Thank you,
ColleenCustomer ServiceMendingShed.com800-339-9297

KitchenAid... | Answered on Apr 12, 2013 | 276 views


The Kitchenaid website doesn't recognize the model number you gave. Could it possibly be KFP760? If so, then here's a link to the free downloadable manual.

http://www.kitchenaid.com/assets/pdfs/product/ZUSECARE/KFPW760OB_Use%20and%20Care.pdf

KitchenAid... | Answered on Jan 28, 2013 | 983 views


I am assuming the unit is getting power. The "power" LED should be lit up on the front of the unit.

The Kitchenaid food processors have a few safety features implimented. If the unit is not assembled properly, this may prevent the unit from turning on. Proper assembly is below:

If it isn't all ready, please disassemble the entire unit. This means removing the blade and/or disc, blade, removing work bowl, work bowl lid, and blade.

Start by placing the work bowl onto the motor base. The work bowl handle should be facing at 9 o'clock, which is out to your left. Rotate the handle downward until it locks in at the 6 o'clock position, which will lock over the center of the button panel.

Repeat the process with the work bowl lid. The blade does not need to be present for the motor to engage, if this is an assembly issue.

If this has not resolve the issue, please ensure the outlet is receiving power.

If the unit is still not functioning, take a close look at the bottom of the work bowl where it meets to the motor base. The work bowl, when locked in, depressed a gray plastic peg. This is the safety mechanism. You may trying depressing this peg on your own with a pencil. If this activates the motor, this may indicate your work bowl is no longer seating correctly.

Also check the work bowl handle to make sure nothing is cracked. There is a plastic assembly in the handle that acts as a second safety feature.

If either of these things seems to be the culprit, I would suggest seeking a new work bowl or work bowl lid to correct the issue.

KitchenAid... | Answered on Oct 05, 2011 | 4,453 views


With the food processor I have it will not allow you to remove the bowl unless the top is off.Try take the top off or putting it on.Then remove it from the processor.

KitchenAid... | Answered on Apr 19, 2009 | 2,272 views


i am also having the same problem. it happened as soon as i got done putting in some parmesan and grated it. never happened before and i've got a few cups of parmesan cheese just sorta wasting away inside the processor. very tempted to break the damn thing open and just buy a new processor from a different company.

KitchenAid... | Answered on Apr 10, 2010 | 3,042 views


I have the 11 cup Kitchenaid food processor and did the same thing this weekend. It took a while but finally figured out how it went back together. Hopefully the pictures help. I know it's difficult to see since the pieces are all black. Good luck!

e0153642-b193-456a-b3da-d61ff8100969.jpeg


6610141b-4582-49d9-9bd5-788c4b7c1fd4-qhxllv4npmtu554ro0tn0uuy-4-2.jpeg

KitchenAid Food... | Answered on Jun 01, 2019 | 253 views


Store it with the lid upside down on top of the bowl

KitchenAid Food... | Answered on Apr 21, 2019 | 66 views


Make sure you have the bowl, lid and sometimes the pusher assembled correctly. If everything is not correct it will not activate the safety switch to allow it to start up.

KitchenAid Food... | Answered on Feb 28, 2019 | 114 views


take it back and get a warranty replacement unit
reading the user manual may be a help

KitchenAid Food... | Answered on Sep 10, 2018 | 251 views


Possibly something about either the lid or the bowl has become deformed. Very likely you will need to replace one or the other.

KitchenAid Food... | Answered on Sep 08, 2018 | 273 views


The solution is 90% going to be replace the lid, or replace the bowl or if you are very unlucky replace both. A proper KitchenAid service agent should have both parts on the shelf and will be able to try a new one of either to see where the fault lies. I think over the years I've replaced more lids than I have bowls.

KitchenAid Food... | Answered on Feb 28, 2018 | 288 views


Find your model number on the list and look for parts Kitchenaid Food Processor Replacement Parts Accessories Sears PartsDirect

KitchenAid Food... | Answered on Dec 20, 2017 | 230 views


Read the handbook and make certain you are assembling the bowl, lid and pusher correctly, they can all play a part in activating the safety mechanisms that put the appliance in the mode that will allow it to be started.

KitchenAid Food... | Answered on Nov 24, 2017 | 2,245 views


hi kimberly.
not sure if this link will help you out but have a look.
How to use the dough blade with my kitchenaid food processor Google Search

KitchenAid Food... | Answered on Nov 02, 2017 | 152 views


Without step-down transformers you are out of luck. I am sorry. I know the transformers are ugly but they are cheaper than replacing your food processor and espresso machine. One thing you could do is to contact Kitchen Aid and ask them if the motor can be wired for 240V. If not, ask them if you can purchase the 240V motor for your processor and replace it directly. As for the espresso machine, no idea...sorry.

KitchenAid Food... | Answered on Oct 26, 2017 | 264 views


food processors have interlocks between the bowl, the top and the base. Inspect to see that those are all making. When you lock the bowl to the base and the top to the bowl you should hear some clicks and see some interlock mechanisms line up at the back of the bowl.

KitchenAid Food... | Answered on Aug 03, 2017 | 238 views


I don't see anything other than hot water and brute force doing anything to help. Probably a two person job and make sure you turn it the right way. Be prepared for something to be broken or damaged.

KitchenAid Food... | Answered on Jul 02, 2017 | 289 views


They now have moved over to an app for that

KitchenAid Food... | Answered on May 12, 2017 | 164 views


The problem will be either the lid or the bowl, both have mechanisms in them that wear/break. Take the processor into a service agent that carries the parts along with your clean bowl and lid. It will be a simple matter for them to try one or the other to see which one makes the difference. I am a service agent and that's what I do, it's far the easiest way to quickly find the problem.

KitchenAid Food... | Answered on Apr 02, 2017 | 257 views

Not finding what you are looking for?
KitchenAid KFP670 Ultra Power Food Processor Logo

Popular Tags

19 questions posted

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Processors Experts

ismash55

Level 2 Expert

138 Answers

john h

Level 3 Expert

22486 Answers

Brad Brown

Level 3 Expert

18110 Answers

Are you a KitchenAid Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...