Hobart A200 Stand Mixer - Answered Questions & Fixed issues


Sorry so late but the reason you need the kit is because the potentiometer (the knob that selects the time) is no longer part of the timer board.You need the pot,and board.I'm a hobart tech,if any other questions let me know.

Hobart A200... | Answered on Oct 18, 2019 | 309 views


http://hobart.co.kr/manual_pdf//013.pdf this is a manual of parts, speed is controled by gears. if you are not sure of what you are doing call for service from hobart or an authorized tech. it is a messy job to boot.

Hobart A200... | Answered on Apr 24, 2019 | 171 views


replace the speed select switch

Hobart A200... | Answered on Nov 10, 2017 | 416 views


Im a hobart service tech and repaired these units often,the seal job is a pain in the ***.Everything has to be torn apart.Forget manuals hobart doesnt give them out but i can step you through it.

Hobart A200... | Answered on Oct 19, 2016 | 337 views


You can go to hobartcorp.com and register for free then you can print or download a parts
manual to help you to do repair. Hobart provide service manual to their technician only.

Hobart A200... | Answered on Oct 19, 2016 | 8,645 views


we dont advise on how to disable safety devices ---and you dont want to disable a safety on a mixer that can rip a limb off and not even bog down

Hobart A200... | Answered on Aug 13, 2016 | 491 views


yes the cast can be welded(brazed). if you are able to weld this yourself, just remember before you can weld it, you have to heat it till it is cherry red then you can weld the piece. if your not qualified to weld it you can usually find a portable welding company to do this for you. hope this helps you please rate the solution...thanks

Hobart A200... | Answered on Jun 16, 2016 | 341 views


I typed in hobart service agents in google and got hobartfood.com.au as a site
landline contact phone number is 1800-462-278 and e- mail is sales@hobartfood.com.au

Hobart A200... | Answered on May 05, 2016 | 256 views


There are two different splash guards fort he A200.
If you have a 12 quart bowl the splash guard is a part number 438078 and if you have the 20 quart bowl the part number is 438079.
Both parts are available from
http://storefront.whaleyfoodservice.com/.

Hobart A200... | Answered on May 05, 2016 | 919 views


Hobart A200 Stand Mixer
Beatriz, I looked through the entire manual, it shows no reverse option. Did you just get the mixer or did you have it repaired. It seams the mixer is either wired wrong or the gears that rotate the mixer were not assembled correctly.
Check the attached link,manual,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

https://my.hobartcorp.com/kroger/TechnicalServiceManuals/A200%20Technical%20Manual.pdf

A200 Hobart Service

Hobart A200... | Answered on Apr 06, 2016 | 342 views


HI Joe
I have the wrong greace in my A200 standmixer i need to know what kind and how much to put in gear cace. thank you

Hobart A200... | Answered on Feb 10, 2016 | 1,026 views


be careful here as the grease used has to meet food quality requirements and is not car grease
it does not need to be full of grease , just enough to cover the teeth
go google and type in --hobart food mixer model a200 --and there may be a pdf version parts list or workshop manual
other than that there will be a contact number for your country or area where you can get advice

Hobart A200... | Answered on Oct 28, 2015 | 1,280 views


ever check the grease in it .

Hobart A200... | Answered on Oct 27, 2015 | 158 views


If the mixers are older the dive key shaft,spring or key are broken,if they are newer the key is sheared.Also check the nuts near the beater shaft and make sure there not too tight.

Hobart A200... | Answered on Oct 08, 2015 | 583 views


The Hobart A-200 is an 80's product. These first came on the market around 1985. There is no way to date the one you have without examining it.

The best estimate is 25-30 years old.

Hobart A200... | Answered on Feb 14, 2017 | 367 views


You must contact the factory for the complet list oh part and a new data plate. This is for insurance and UL requirements.

Hobart A200... | Answered on Sep 02, 2015 | 329 views


Try and get some CRC into the top where the hook joins the shaft. You need to be rocking it back & forth to try and get movement. Gradually the movement will increase if your strong men are strong enough and have stamina as well. Once you get it off clean up the shaft with a wire brush. Clean out the hole in the dough hook with the proper size drill, you don't want to make the hole bigger, just cleaner. It will be a build up of flour in there, it packs hard and shrinks the hole, almost unbelievable but true.

Hobart A200... | Answered on Aug 10, 2015 | 256 views


if it has a spec.# instead of a ml.#it would have to be at least 25-30 yrs. old

Hobart A200... | Answered on Apr 21, 2015 | 741 views

Not finding what you are looking for?
Hobart A200 Stand Mixer Logo

370 questions posted

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1355 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...