20 Most Recent UTStarcom Blitz Cell Phone Questions & Answers


the only way to change that password is to send it into verizon.

UTStarcom Blitz... | Answered on Jun 27, 2015


This option allows you to transfer music files from your PC. In order to use this option, you must install V CAST Music with Rhapsody on your PC. 1. Open V CAST Music with Rhapsody software. Don’t have V CAST MUSIC with Rhapsody software? Download it for free at www.verizonwireless.com/music. 2. Install the device USB drivers before connecting your phone to a PC. USB Cable and Device Drivers can be purchased separately via the Music Essentials Kit compatible with this device. 3. From the main screen on your phone, the SYNC MUSIC V CAST MOBILE PHONE display appears. Your phone should display the message: Connected. Connection may take a few seconds. 4. Drag and drop the song(s) you want to sync from My Library, to your V CAST Music with Rhapsody mobile phone, listed under the Sources tab. Once synchronization is complete, press the END/Power Key and disconnect the USB cable (purchased separately). 5. Under the Music & Tones menu, open My Music to view and play your music. • A compatible USB cable (sold separately) is required for syncing. • Music can also be purchased via V CAST Music with Rhapsody through your PC.
Hope this helps, let me know if I can help you with anything else.
JimmyC

UTStarcom Blitz... | Answered on Oct 04, 2014


Sorry we can't help with that.

UTStarcom Blitz... | Answered on Jun 19, 2014


Hi if you are looking for code to unlock your pantech phone from its present network ..Then have a look at sites like Mobile-Unlocker.com here they are rendering unlock code for all mobile models at reliable cost .You first verify that whether they are rendering code for your mobile model, country and network.if yes then pay for it and unlock your phone ...

UTStarcom Blitz... | Answered on Dec 26, 2013


ha ha ha as you like i think you need to check battery first, if it shows in the screen that the battery still charging all they long but actually a faulty battery doesn't charge..

UTStarcom Blitz... | Answered on Sep 22, 2013


If you are blocked by a firewall try changing the IPaddress according to your location
You can find an up-to-date list of all the AWS EC2 IP addresses here: https://forums.aws.amazon.com/ann.jspa?annID=1528
All Blitz HTTP requests will originate from these IPs.

UTStarcom Blitz... | Answered on Aug 11, 2013


screen still black / white it's not a screen problam .
it's belt problam
change your belt of cell who connect your slider to your keypad
that belt.

UTStarcom Blitz... | Answered on Jun 23, 2013


what so i do if i don't remember my security code?

UTStarcom Blitz... | Answered on Mar 16, 2013


Hello,

Reset the phone back to factory default as i will advice, this should fix all the problem with the phone, follow the steps below to reset your phone.

go in to tools/phone settings/security/reset phone. Security code is six zeros and the passcode to reset is the last 4 of your programmed phone number. this should fix the problem.

Take care.

UTStarcom Blitz... | Answered on Feb 20, 2013


lol i did the same thing, and mine didnt work anymore so i just broke the p.o.s.. i opened it up and theres something that has to hit a certain post and you may have knocked that off place and or there is also a ribbon wire that may have become destroyed or damaged from a partial cut and or rip. sorry buddy. ure sol

UTStarcom Blitz... | Answered on Jun 17, 2012


if its turning on then try reset on factory settings. else get the firmware (flash) reinstalled.

UTStarcom Blitz... | Answered on Jun 14, 2012


try one of the search engines u'll need make and model number

UTStarcom Blitz... | Answered on Dec 31, 2011


Hello
What you need to do first is to open the back of your phone,remove the battery and check if it is swollen,if it is then it is damaged but if its not then place the metal-like charging port on the battery to your tongue and see if it shocks a little then the battery is ok but if no it is no longer strong,After that you would check the pins inside the phone that contacts the battery if no one is damaged,then check if there is a contact between the battery and the pin.
After all the procedure and the phone doesn't charge then you would have to replace the charging port of your phone in order for your phone to work perfectly again.
TAKE CARE

UTStarcom Blitz... | Answered on Oct 04, 2011


You can get the unlock code through online..........give your IMEI number and get the unlock code for ur mobile.... i will suggest the website Unlock-Zone.com which is doing good service .....you can approach this website.
This site is nearly perfect and they were recommended highly in the cell phone forums. I used them to unlock my cell phone. contacted them and within 30 mins i had my unlock code and my phone was unlocked.
Hope this helps.

UTStarcom Blitz... | Answered on Sep 27, 2011

Not finding what you are looking for?
UTStarcom Blitz Cell Phone Logo

161 questions posted

Ask a Question

Usually answered in minutes!

Top UTStarcom Cell Phones Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

L Vincent Testa
L Vincent Testa

Level 3 Expert

721 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

29146 Answers

Are you an UTStarcom Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

UTStarcom Cell Phones

  • UTStarcom Cell Phones

Most Popular Question

also along not being able hear call

  • Cell Phones
Loading...