20 Most Recent Lexmark X2650 All-In-One InkJet Printer Questions & Answers


Here is the link to the exact manual you need:

http://www.lexmark.com/publications/pdfs/2007/2600/v7649663_en.pdf

Lexmark X2650... | Answered on Oct 11, 2018


Which versions do you want?
ISIS Twain Driver ver1.1 1.2 1.3 1.7 1.8 1.9 2.3 2.5 etc

Some support Win8 others do not

Lexmark X2650... | Answered on Sep 17, 2018


your problem may be ur power adapter has gone out... try replace by checking your input volts and ampere as well as output volts and ampere. you can use compatible also. if same problem occurs it might be the power supply area problem inside the printer

Lexmark X2650... | Answered on Mar 15, 2017


The EC5 error code indicates a short has been detected in one of your cartridges. Open the printer and remove both cartridges. Close the cover. Unplug and replug the printer into the power source to reset it. When the printer turns on, reinsert one cartridge first. Close the cover and check for any errors. Open the printer cover again and reinsert the other cartridge. Replace whichever cartridge is causing the error to pop up. Or you can try to insert a different known working cartridge to determine if the other is faulty.

Lexmark X2650... | Answered on Nov 12, 2015


To scan documents for editing and saving as PDF file, you will need to install the Lexmark OCR scan software on your computer. The Lexmark scan software (no downloadable version) is only available on the installation disc that came with your printer. If you lost the disc, please contact Lexmark Technical Support Center for assistance.


To install the OCR scan software from the printer installation CD:

  1. Insert CD into the CD-ROM drive. If the installation screen open, click Cancel.
  2. Double-click on My Computer / Computer.
  3. Right-click on Lexmark XXXX CD and select Open.
  4. Double-click on OCR.
  5. Double-click on Setup.exe to install the OCR software. Your operating system will then determine the language in which it is installed.

Lexmark X2650... | Answered on Oct 17, 2015


You can make any printer with a usb port wireless by adding a usb to wireless print server. Linksys makes them. Keep in mind that typically over this type of connection you will not be able to utilize scanning functions if it has them.

Lexmark X2650... | Answered on Aug 24, 2015


When you restart your PC does the printing continue from where it had abruptly stopped printing or does the printer print a fresh copy .
In any case the clean the Print Cartridge Carry Assembly Mount Rod and try freeing up more space on your PC hard Disk for spooling the print data

Lexmark X2650... | Answered on Jun 29, 2015


it seems that wireless is not supported, and you must use a USB cable. Check that the connectors are the correct ones; printer accepts a type B ('house') male connector (plug)
If uncertain consult Lexmark support, or the manual for this printer. Information (including probably a manual) can quickly be obtained from the webpage
All Products Printers MultiFunction Lexmark X2650 Lexmark

The image shows two connectors (which may be on either end of a single cable, and what I think you need) lower is type B (printer end) , upper is type A (computer end, most commonly). Available in various lengths, you need USB 2.0 spec.

25639017-l5nz1zge0s5jbgweyu4yqzt0-3-0.jpg

Lexmark X2650... | Answered on Apr 10, 2015

Not finding what you are looking for?
Lexmark X2650 All-In-One InkJet Printer Logo

199 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

X Lexmark

  • X Lexmark

Most Popular Question

just bought lexmark x2650 printer came

  • Office Equipment & Supplies
Loading...