20 Most Recent Frigidaire Gallery 24 in. Built-In Dishwasher FGHD2433KB Questions & Answers


Good Morning Friend,

I understand that your Frigidaire dishwasher, model# FGHD2433KB, is not draining. Here are some suggestions that you can try.

    1)If your appliance is hooked up to a garbage disposal, make sure the disposal is empty.

    2)Check to make sure that the knockout plug has been removed from inside your garbage disposal.

    3)The inside of your dishwasher is self-cleaning with normal use. If needed, clean around the tub gasket area with a damp cloth. The filter is self-cleaning. A glass trap located in the center of the filter is designed to collect pieces of broken glass, straws, bones and pits. To remove items in glass trap, grasp handle, lift out, empty and replace.

    4)The Overfill Protector keeps your dishwasher from overfilling and is located in the left front corner of the tub. Clean this occasionally with household cleaner containing vinegar or bleach to dissolve any buildup. The Overfill Protector should move up and down freely about one inch. If it does not move, lift and clean underneath of it.

    5)Check to see if drain hose is kinked.

    6)Make sure cycle is complete, not in a pause.

    I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your dishwasher status has changed successfully. Hope this is helpful.

    -Best Regards-
    WP

Frigidaire... | Answered on May 17, 2014


Cannot be answered with the information provided.

Need the serial number from the manufacturer's plate, which will probably tell you the year of manufacture.

Here is a link to Frigidaire: https://www.frigidaire.com/Owner-Center/Product-Support--Manuals/?productCode=FFBD2406NB

Frigidaire... | Answered on Sep 29, 2019


call FRIGIDAIRE AND LET THEM SOLVE IT IF INDEED BRAND NEW

Frigidaire... | Answered on Sep 22, 2019


Sounds like you have a stuck relay (or shorted triac) on the main control board, which means you will have to replace the control board.

Frigidaire... | Answered on Aug 17, 2019


the problem you have is probably in the heat circuit. its trying to heat the water up and keeps running because the water does not get any hotter. you need to check the heater wires and a couple of sensors as well as the heater itself.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/dude_653d05454b389bba

Frigidaire... | Answered on May 20, 2019


Check the bottom or bottom panel of the dishwasher for the schematic it is usually in a plastic sleeve.

Frigidaire... | Answered on May 10, 2019


Does this mean the dishwasher doesn’t work at all or just the display lights? Remember the switch on the wall turns the dishwasher on and off. That could be the only problem !!

Frigidaire... | Answered on May 04, 2019


CL is a generic clear code. Reset the unit at the household circuit breaker for about 10-15 minutes, and then retry. If the same code comes up then you have a communication error with your main control board, and will require a repair.

Frigidaire... | Answered on Mar 25, 2019


It is possible that you have a weak circuit breaker. Use an extension cord and run it from a different outlet on a different breaker.

Frigidaire... | Answered on Jan 26, 2019


Hello Paul Maksymowicz & welcome to FIXYA, Your ERROR code SEEMS to indicate you have indeed filled your SAFETY tray (designed to prevent FLOODING). FRIGIDAIRE's solution is to UNINSTALL your unit and (TIP) drain your dishwasher to eliminate your "i30" ALARM condition... Without intervention the SEWAGE situation (I suspect) will reoccur... FIX IT...!! To ELIMINATE the DISPOSER flooding condition (building codes usually require an elevated SYPHON BREAK (adequate))... to prevent back-washing of WASTE-WATER into your cleaning unit (serious health & safety issue). FOLLOW proper installation procedures... (read the manual) and avoid poisoning yourself, your family, associates, visitors, friends & loved ones... (my opinion). https://en.wikipedia.org/wiki/Carnac_the_Magnificent

Frigidaire... | Answered on Jan 25, 2019


If you can get it to drain you might try putting a couple of pan of water into machine to clean it out reset by holding down speed button and soil level button together until it gives a sound

Frigidaire... | Answered on Jan 14, 2019

Not finding what you are looking for?
Frigidaire Gallery 24 in. Built-In Dishwasher FGHD2433KB Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Frigidaire Dishwashers Experts

Archie Ferrarini
Archie Ferrarini

Level 3 Expert

869 Answers

Mike

Level 3 Expert

4363 Answers

Brad Brown

Level 3 Expert

18108 Answers

Are you a Frigidaire Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Frigidaire Dishwashers

  • Frigidaire Dishwashers

Most Popular Question

doesnt fghd2433kb not drain

  • Dishwashers
Loading...